Advertisement
Quick Links
ORIGINAL VAXCEL CEILING FAN LIMITED LIFETIME WARRANTY*
*for full limited lifetime warranty details please see final page of these instructions.
Safety Instructions
READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN TO
INSTALL THE FAN AND SAVE INSTRUCTIONS.
• All set screws of the fan must be checked and retightened where necessary before installation.
• To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets,
balancing the blades or cleaning the fan. Do not insert foreign objects between rotating fan blades.
• Before changing the fan direction, turn off the fan and wait for the fan blades to stop completely.
• The safeguards provided by these safety instructions and by the separate installation instructions
are not meant to cover all possible conditions and situations that may occur. It must be understood
that common sense, caution and care are factors which can not be built into this product. These
factors must be supplied by the person(s) installing, caring for and operating the fan.
WARNING
• TO AVOID RISK OF ELECTRIC SHOCK, BE SURE TO SHUT OFF POWER AT THE MAIN
FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS
FIXTURE. TURNING OFF THE ELECTRICAL POWER BY USING THE LIGHT SWITCH
IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.
• TO REDUCE THE RISK OF INJURY, INSTALL THE FAN SO THAT THE BLADES ARE
AT LEAST 7 FEET (2.1 METERS) ABOVE THE FLOOR AND AT LEAST 18 INCHES
(0.5 METERS) FROM THE TIP OF THE BLADES TO THE WALL.
• TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT
TO OUTLET BOX MARKED "ACCEPTABLE FOR FAN SUPPORT" AND USE MOUNTING
SCREWS PROVIDED WITH THE OUTLET BOX.
• THE INSTALLATION HAS TO BE IN ACCORDANCE WITH THE NATIONAL ELECTRICAL
CODE, ANSI/NFPA 70-1999 AND LOCAL CODES. IF YOU ARE UNFAMILIAR WITH THE
METHODS OF INSTALLING ELECTRICAL WIRING, SEEK THE SERVICES OF A
QUALIFIED LICENSED ELECTRICIAN.
• CETL LISTED FOR DAMP LOCATIONS; FOR USE IN COVERED PORCHES PATIOS
OR SUNROOMS WHERE RAIN OR WATER WILL NOT REACH THE CEILING FAN.
Model No.: F0103
PAGE: 1 / 12
231013
Advertisement
Related Manuals for Vaxcel Kodiak F0103
Summary of Contents for Vaxcel Kodiak F0103
- Page 1 ORIGINAL VAXCEL CEILING FAN LIMITED LIFETIME WARRANTY* *for full limited lifetime warranty details please see final page of these instructions. Model No.: F0103 Safety Instructions READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN TO INSTALL THE FAN AND SAVE INSTRUCTIONS.
-
Page 2: Package Contents
Package Contents: Unpack your fan and check the contents. You should have the following items. 1.) Hanger Bracket 2.) Canopy Canopy Cover (Comes in a Separate Bag) 4.) Downrod Stand Cover 5.) Downrod Set (Includes Hanger Ball, 6˝ Downrod, Hanger Pin & Lock Pin) 6.) Decorative Plate (3 PCS) Blade Bracket (3 PCS) 8.) Fan Blade (3 PCS) - Page 3 Exploded View Detail Hanger Bracket Hanger Ball Canopy Canopy Cover Downrod Stand Cover Hanger Pin Downrod Lock Pin Collar Fan Motor Assembly Screw Set Switch Box Cover Decorative Screw Blade Bracket LED Bulb Cover Blade Fan Light Decorative Plate LED Bulb Dual Mount Drawing Downrod Mount Sloped Ceiling Mount (Up to 23 degrees)
-
Page 4: Installation Instructions
INSTALLATION INSTRUCTIONS IMPORTANT: BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION IN THE SEPARATE SHEET "SAFETY INSTRUCTIONS" AS WELL AS THE FOLLOWING "INSTALLATION INSTRUCTIONS". IF IN DOUBT, CONSULT A QUALIFIED ELECTRICIAN. SAVE ALL INSTRUCTIONS. NOTE: The fan weight is 15.21 lbs (6.9 kg). Be sure the outlet box you are using is securely attached to the building structure and can support the full weight of the fan. - Page 5 Both the transmitter and receiver have a 4-key Transmitter unit code on each SUR Switch (Fig.8) and by default, all keys are pre-set to the "off" position. This means that the transmitter and receiver are already paired together. However, if you have multiple fans and remote controls and want to Receiver avoid interference between them, you can "pair"...
- Page 6 Fig.12 Fig.14 Hanger Bracket Blade Bracket Blade Screw Canopy Screw Washer Blade Bracket Canopy Decorative Blade Plate Plastic Insert Decorative Canopy Cover Motor Screw Fig.13 Plate Thread the blade screws through the Remove the motor screws from fan motor Slide the canopy up to ceiling and over blade bracket, and blade into the the two canopy screws on hanger assembly.
- Page 7 Fig.18 Fig.19 Decorative Screw 3-5W E12 Base ST15 LED Bulb Cover Type LED Bulbs (included) Fan Light Set Screw E12 Base ST15 Type LED bulbs Max.60W Carefully put the wires into the switch box, then attach Install LED bulbs (included). See relamping label at socket the fan light into the switch box with the switch box area or packaging for maximum allowed wattage.
- Page 8 Install Without Remote Controller Note: Remote controller can not be used along with a solid-state speed control at the same time. Turn OFF the electric circuit at the main fuse or circuit breaker box. (See Fig.24) Fig.25 Unscrew the canopy. Remove the wire connectors from the fan to ceiling wire connection.
- Page 9 For a single switch Follow these steps: Connect the white (neutral) wire from motor to the white (neutral) wire from the outlet box with a wire White connector. Connect three ground wires (Green Connect the black (hot) wire or bare copper) coming (This is for fan control) and blue Black from outlet box,...
-
Page 10: Troubleshooting Guide
Troubleshooting Guide If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Troubleshooting Guide. If a problem cannot be remedied or you are experiencing difficulty in installation, please call our Customer Service Department (1-800-482-9235). - Page 11 DYNAMIC BLADE BALANCING KIT YARDSTICK BALANCING WEIGHT CENTERLINE MEASURING POINT COUNTER- CLOCKWISE PLASTIC CLIP PREFACE Your ceiling fan may sometimes have wobbling problems when operating due to irregularity in the blades or the blade brackets. Improper assembly in the mounting system may cause some additional problems.
- Page 12 Vaxcel reserves the right to repair, replace or issue a credit for any properly installed product, provided it is returned per RMA instruction. This warranty is limited to the cost of the product only and does not extend to transportation, installation or replacement costs.