Advertisement
Quick Links
ORIGINAL VAXCEL CEILING FAN LIMITED LIFETIME WARRANTY*
*for full limited lifetime warranty details please see final page of these instructions.
Safety Instructions
READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN TO
INSTALL THE FAN AND SAVE INSTRUCTIONS.
• All set screws of the fan must be checked and retightened where necessary before installation.
• To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets,
balancing the blades or cleaning the fan. Do not insert foreign objects between rotating fan blades.
• Before changing the fan direction, turn off the fan and wait for the fan blades to stop completely.
• The safeguards provided by these safety instructions and by the separate installation instructions
are not meant to cover all possible conditions and situations that may occur. It must be understood
that common sense, caution and care are factors which can not be built into this product.
• These factors must be supplied by the person(s) installing, caring for and operating the fan.
WARNING
• TO AVOID RISK OF ELECTRIC SHOCK, BE SURE TO SHUT OFF POWER AT THE MAIN
FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS
FIXTURE. TURNING OFF THE ELECTRICAL POWER BY USING THE LIGHT SWITCH
IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.
• TO REDUCE THE RISK OF INJURY, INSTALL THE FAN SO THAT THE BLADES ARE
AT LEAST 7 FEET (2.1 METERS) ABOVE THE FLOOR AND AT LEAST 18 INCHES
(0.5 METERS) FROM THE TIP OF THE BLADES TO THE WALL.
• TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT
TO OUTLET BOX MARKED "ACCEPTABLE FOR FAN SUPPORT" AND USE MOUNTING
SCREWS PROVIDED WITH THE OUTLET BOX.
• THE INSTALLATION HAS TO BE IN ACCORDANCE WITH THE NATIONAL ELECTRICAL
CODE, ANSI/NFPA 70-1999 AND LOCAL CODES. IF YOU ARE UNFAMILIAR WITH THE
METHODS OF INSTALLING ELECTRICAL WIRING, SEEK THE SERVICES OF A
QUALIFIED LICENSED ELECTRICIAN.
Model No.: F0114
PAGE: 1 / 11
230210
Advertisement
Related Manuals for Vaxcel Huron
Summary of Contents for Vaxcel Huron
- Page 1 ORIGINAL VAXCEL CEILING FAN LIMITED LIFETIME WARRANTY* *for full limited lifetime warranty details please see final page of these instructions. Model No.: F0114 Safety Instructions READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN TO INSTALL THE FAN AND SAVE INSTRUCTIONS.
-
Page 2: Package Contents
Package Contents: Unpack your fan and check the contents. Y ou should have the following items. 1.) Hanger Bracket 2.) Canopy Canopy Cover (Remove the Preassembled Canopy Cover from the Canopy Before Installation.) 4.) Downrod Set (Included Hanger Ball, 6” Downrod, Hanger Pin & Lock Pin) 5.) Downrod Stand Cover 6.) Fan Blade (5 PCS) 7.) Fan Motor Assembly... - Page 3 Exploded View Detail Hanger Bracket Hanger Ball Canopy Canopy Cover Downrod Lock Pin Hanger Pin Downrod Stand Cover Collar Blade Fan Motor Assembly Connect Plate of Fan Light LED Bulb Fan Light Triple Mount Options Ceiling Mount Downrod Mount Sloped Ceiling Mount ( Up to 23 degrees) PAGE: 3 / 11 230210...
-
Page 4: Installation Instructions
INSTALLATION INSTRUCTIONS IMPORTANT: BEFORE YOU BEGIN INSTALLATION, CAREFULLY READ ALL INFORMATION PROVIDED IN THE SAFETY INSTRUCTIONS AND INSTALLATION INSTRUCTIONS. IF IN DOUBT, CONSULT A QUALIFIED ELECTRICIAN. SAVE ALL INSTRUCTIONS. NOTE: The fan weight is 17.86 lbs (8.1 kgs). Be sure the outlet box you are using is securely attached to the building structure and can support the full weight of the fan. - Page 5 Fig.9 (For downrod mount only): Hang the fan on hanger bracket, and make sure the slot of hanger ball is Slot snapped into the chip of hanger bracket exactly. Hanger Bracket Note: For sloped ceiling installation, make sure the slot of hanger ball Chip and the chip of hanger bracket face down.
- Page 6 Safety Cable Hook Safety Cable Zip-tie Hang the safety cable into the safety cable hook, tighten the safety cable to the safety cable hook by using the zip-tie. Fig.13 Fig.14 Fig.15 Fig.16 Hanger Slot Bracket Screw Fan Motor Assembly Canopy Fan Motor Blade Assembly...
- Page 7 The slide switch on fan motor Slide Switch assembly sets direction of fan rotation. Select the desired direction of fan rotation. Forward Reverse Push the slide switch left for "Forward" and right for "Reverse". Note: Wait for fan to stop before reversing the direction of blade rotation.
- Page 8 For a single switch Follow these steps: Connect the white (neutral) wire from motor to the white (neutral) wire from the outlet box with a wire White connector. Connect three ground wires (Green Connect the black (hot) wire or bare copper) coming (This is for fan control) and blue Black from outlet box,...
-
Page 9: Troubleshooting Guide
Troubleshooting Guide If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation or wiring. In some cases, these installation errors may be. If you experience any faults, please check this Troubleshooting Guide. If a problem cannot be remedied or you are experiencing difficulty in installation, please call our Customer Service Department (1-800-482-9235). - Page 10 DYNAMIC BLADE BALANCING KIT YARDSTICK BALANCING WEIGHT CENTERLINE MEASURING POINT COUNTER- CLOCKWISE PLASTIC CLIP PREFACE Your ceiling fan may sometimes have wobbling problems when operating due to irregularity in the blades or the blade brackets. Improper assembly in the mounting system may cause some additional problems.
- Page 11 Vaxcel reserves the right to repair, replace or issue a credit for any properly installed product, provided it is returned per RMA instruction. This warranty is limited to the cost of the product only and does not extend to transportation, installation or replacement costs.