SME 3012-R Instructions Manual

INSTRUCTIONS
Introduction
Manufacture of Series II Precision Pick-up Arms ended
in 1972. In response to many requests to reintroduce
them for professional and enthusiast hi-fi application
we have produced the Models 3012-R, 3010-R and
3009-R. They are basically similar to their classic
predecessors but with important refinements includ-
ing:—
Thin walled stainless steel tone-arm.
New design balance system with longitudinal and
lateral fine adjustment for cartridges weighing from
14-26 grams or plug-in heads up to 33/2 grams.
Extra-rigid low mass shell with double draw-in pins.
Geometry optimised for 12" records.
These arms are suitable for all cartridges having
standard 2" fixing centres and a minimum vertical
tracking force requirement of 1.25 grams. Below this
the use of one of our Series Ill arms is recommended.
Please read this instruction book carefully before
attempting installation and use.
Following a policy of continuous improvement we
reserve the right of any consequential departure from
illustration or specification.
S59 IMLS
Models 3012-R, 3010-R and 3009-R
Precision Pick-up Arms
Contents
Page
2 Introduction
4 Dimensions, Model 3012-R
5
Dimensions, Models 3010-R and 3009-F
6 Contents of the pack
7 Layout
8 Fitting the balance weight
9 Fitting the arm
10-11 'Fitting the cartridge
12 Audio lead
14 Lateral balance
15 Height adjustment
16 Cartridge azimuth
17 Tracking adjustment
18 Bias adjustment
19 Operation
20-21 'Fitting the Fluid Damper
22 Filling the Fluid Damper
23 Cleaning the arm lift
23 Appendix