Solidyne UNIDEX UX24 Owner's Manual
Hide thumbs
Also See for UNIDEX UX24:
- Owner's manual (48 pages) ,
- Disassembly manual (15 pages) ,
- Owner's manual (44 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Solidyne UNIDEX UX24
Summary of Contents for Solidyne UNIDEX UX24
- Page 2 Page 2 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM...
-
Page 3: Table Of Contents
2.5 About the connectors and wiring................................12 2.5.1 Wiring kits........................................12 2.5.2 RJ45 nomenclature......................................13 2.5.3 RJ45 inputs and outputs....................................13 2.5.4 Solidyne UX24 wiring kits....................................13 2.5.4.1 To RCA (unbalanced)............................................13 2.5.4.2 To balanced XLR............................................. 13 2.5.4.3 To balanced TRS............................................. 13 SECTION 3 UNIDEX EXTERNAL ADAPTERS......................15... - Page 4 6.3.2 Mic and line channels..................................... 44 6.3.3 TELCO channels......................................44 6.4 AUDIO PROCESS....................................45 6.5 FIRMWARE update...................................46 SECTION 7 DIAGRAMS AND TECH NOTES......................47 Diagrams..........................................47 Quick installation guides......................................47 Cables and kits for the installing..................................... 47 SECTION 8 TECH SPECS............................48 Page 4 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM...
-
Page 5: Section 1 Overview
The channels can work in 3 modes: MIC; LINE; TELCO. These modes changes functions and the behavior of the channel and sets according Solidyne UNIDEX UX24 is a standalone unit, containing a to the input. fully digital mix engine. It works at 24 bits @ 48 kHz with •... -
Page 6: Outputs
1 input for external tuner, used to monitor the transmission on-air. 1.2.3 Outputs Features: UNIDEX UX24 has 18 stereo outputs and 4 outputs for monitoring: • Connection for 5 headphones in HD5 with in- dependent controls of level (3 headphones in •... -
Page 7: Section 2 Connections
CPU 2.2.1 Pre-assembled cable kits from the touch screen. The STA- TUS EXTRA option locates in Solidyne provides (optionally) kits of cables and STATUS area. Touch on “ ” icon adapters; intended to install the console without weld- to access. -
Page 8: Rear Panel
RJ45 to XLR (SOL-M12/XLRF y SOL-M25/ right if stereo. In this case the connection is made XLRF). Mic inputs uses only the LEFT channel. using adapter cables by Solidyne (or others brands like StudioHub , by AngryAudio). 2.3.2 UNIDEX inputs 2.3.3 Balanced analogue inputs... -
Page 9: Aes3 Digital Inputs
USB device. Download the driver from the following link: 2.3.7 Analog outputs http://solidynePRO.com/DW/Solidyne_UsbAudio.zip UNIDEX UX24 have 8 stereo analog outputs: Run the setup and follows the instructions. • 4 balanced (electronically), Once installed, Windows shows four Solidyne USB out- •... -
Page 10: Dante - Aes67 (Optional)
Solidyne StudioBox HD3/HD5 (optional). AoIP 15 It gives the signals for monitoring into the Studio A. AoIP 16 Solidyne StudioBox HD3 and HD5 monitoring boxes man- ages up to five headphones (HD5) and monitor speakers, Page 10 Solidyne UNIDEX UX24... -
Page 11: Monitoring In The Control Room
WARNING 2.3.15 Tally light ONLY THE “STUDIO MONITOR” ADAPTER PATCH CORD PRO- VIDED WITH THE UNIT can be used when the Solidyne Stu- There are two outputs for “On Air” signaling lights; one dioBox is not available. for Studio A and another one for the Studio B. Each out- put gives 12VDC / 250mA. -
Page 12: Configure The Gpio Actions
LED light, using GPO 1. 2.5 About the connectors and wiring 2.5.1 Wiring kits Solidyne can provide all cables and adapters patch cords needed to the installation. See the following links for de- tails. -
Page 13: Rj45 Nomenclature
The RJ45 microphone inputs in the back panel uses only the left channel o the balanced connection. BALANCED INPUTS / OUTPUTS Solidyne provides the cables SOL-M25/1XLRF and SOL- WIRE COLOR M12/1XLRF to connect microphones (single XLR to RJ45). 1 Left channel (+) - Page 14 Page 14 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM...
-
Page 15: Section 3 Unidex External Adapters
3.2.2 Inputs settings 3.2.1 Setting up UDX 2MIC is connected to a balanced UNIDEX input, us- ing a single STP RJ45-RJ45 cable (Solidyne SOL-P50 or SOL-P25 cables). Microphones connects to the UDX adapter using stan- dard XLR. UDX 2MIC has -10dB pad dip- switches. -
Page 16: Channel Configuration
Section 7 – Diagrams and tech notes. Using input UNIDEX 3 and output UNBAL 7 Using input UNIDEX 4 and output UNBAL 8 REMEMBER SAVE THE CURRENT SCENE TO STORE THE SET- TINGS AND CONFIGURATIONS. Page 16 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM... -
Page 17: Connection To Phone Lines
(AM) and in the VHF and UHF bands, and it is not usually necessary to add any type of additional filter. Telephone lines are internally protected against high voltage discharges (flashes or non-direct rays) by metal oxide varistors. WWW.SOLIDYNEPRO.COM Solidyne UNIDEX UX24 Page 17... -
Page 18: Outputs Setings
3.3.4 Channel settings REMEMBER SAVE THE CURRENT SCENE TO STORE THE SET- TINGS AND CONFIGURATIONS. To download a Quick Installation Guide (pdf) for this UDX adapter, go to Section 7 – Diagrams and tech notes. Page 18 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM... -
Page 19: Udx Tel+Bt
To download the Quick Installation Guide (pdf) go to Section 7 – Diagrams and tech notes. 3.5 UDX USB This adapter allows to connect a computer, via USB, with one AES3 input and one AES3 output. 3.5.2 Output setup WWW.SOLIDYNEPRO.COM Solidyne UNIDEX UX24 Page 19... -
Page 20: Channel Settings
3.5.3 Channel settings 3.6 StudioBox HD3 & HD5: monitoring into the Studio The modules for monitoring Solidyne StudioBox HD5 and HD3 resolve the sending of all monitoring signals to the studio. Figure 8: Studiobox HD5 and HD3 3.6.1 CONNECTIONS WARNING DO NOT CONNECT the OUTPUT Studiobox using RJ45 audio patch cords (it is not Studiohub compatible). -
Page 21: Using The Studiobox
3.6.2 USING THE STUDIOBOX Using headphones into the Studio The Solidyne HD5 accessory manages up to five head- phones with independent level knobs. HD3 allows to connect up to 3 headphones and has two level knobs. - Page 22 Page 22 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM...
-
Page 23: Section 4 Start Up And Routing
To restrict the access to advanced features, the USB-01 LINE USB1 L&R default boot profile must be changed to BASIC or EX- USB-02 LINE USB2 L&R PERT. For more details please see 4.9 SETTINGS / USB-03 LINE USB3 L&R USERS. WWW.SOLIDYNEPRO.COM Solidyne UNIDEX UX24 Page 23... -
Page 24: Settings
When a UNIDEX input is used as a balanced line input, List of all available audio inputs in the UNIDEX UX24. To navigate the list, turn the encoder. At the right, the options UDX TYPE must be LINE (default). -
Page 25: Output List
NUS the telephone line audio. Outputs 5 to 8 and USB outputs can work as MIX-MINUS or normal (DIRECT) mode. This outputs shows the follow- ing settings options: Figura 14: System configuration Figure 13: mix-minus settings WWW.SOLIDYNEPRO.COM Solidyne UNIDEX UX24 Page 25... -
Page 26: Channel On-Air On Starting
When UX24 access to Internet, it synchronizes with a QUALITY: Audio bitrate. World Clock (UTC). The user must define the Time Zone. APPLY: Name that identify the stream. NOTE Settings for Icecast/shoutcast usually are given by the streaming provider. Page 26 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM... -
Page 27: Rtp Stream
QUALITY: MP3 for MP3 or sample rate for PCM. GPO: Sends the tally light signaling vía TCP/IP to compati- ble Solidyne devices. There is two data lines that sends the following signals: Studio A & B (lines 1 and 2 respectively) Studio B &... -
Page 28: Settings: Users
BASIC profile, passwords for EXPERT or ADMIN must be known in order to access restricted features. 4.10 AoIP UNIDEX UX24/A67 has the module DANTE for 16x16 net- worked audio. This screen shows the settings and status of DANTE network. The DANTE network and devices con- figures from DANTE Controller software. -
Page 29: Section 5 Operation
+ 4dBu for balanced and 0dBu for unbalanced. Setting an output level above the nominal level reduces headroom, Stream IP: Destination IP address for streaming. and the output may hit clipping before the level meter shows it. SCENE: Indicates the current scene. WWW.SOLIDYNEPRO.COM Solidyne UNIDEX UX24 Page 29... -
Page 30: Channels
Slightly moving a fader or pressing an Intercom button activates the displays. 5.3 Channels UNIDEX UX24 is a 24-channel mixing console. In the basic 4 MAIN CLOCK: Shows the current time. The time syn- configuration, it has 12 channels with 100mm "real"... -
Page 31: Monitoring Section
(note that there is not volume physical knob for Studio Speakers). In this case, all the microphones are configured as located into the Control Room, to enable the muting for the Control Room speakers. WWW.SOLIDYNEPRO.COM Solidyne UNIDEX UX24 Page 31... -
Page 32: Screen Monitor
CUE buttons. ing, TELCO and Intercom). ADVANCED Available options are: The built-in mic, or the inputs MIC- 1 to MIC-4; UNIDEX-4 L and UNIDEX-4 R. Opens a new screen, with the advanced monitoring op- tions: Page 32 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM... -
Page 33: The Function Select
INTERCOM INPUT GAIN Turning the encoder to navigate the chan- nels. The encoder explore the 24 channels, Is the level at which signals coming from Solidyne Studio whether physical or virtual. Box (reverse talkback) and UDX INTERCOM (coming soon) mixes to the bus CUE. - Page 34 (on) or disabled (off). screen. In the hardware channels, the status will be re- flected in the button light. The same is for the CUE bus. Page 34 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM...
-
Page 35: Telco - Communications
The number and name of the channel. ing SETTINGS. • The status of the line: YELLOW if there is an incom- ing call (RING) GREEN when a line is on hold and RED when it is on the air. WWW.SOLIDYNEPRO.COM Solidyne UNIDEX UX24 Page 35... -
Page 36: Using Telco With Mobile Phones
With incoming calls, it allows to Turn on Bluetooth on the phone and search for de- take the line and leave it on hold. When a call is on-air, it vices. SOLIDYNE BTM641 will appear in the list allows to end the communication. “found devices”. -
Page 37: Linking More Than One Bluetooth Phone
IMPORTANT NOTE: All Bluetooth devices in UNIDEX have easily connect and disconnect from different Bluetooth the same name: SOLIDYNE BTM641. This means that the devices by simply selecting the device from the list of different Bluetooth channels (regardless of the name as-... -
Page 38: Making The Call From The Cellphone
• Hold down ON AIR for 3 seconds. • Talk from the console using the cue microphone • Touch HANG-UP on the TELCO display. and circuit. Page 38 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM... -
Page 39: Making A Call From The Console
They are not “channel” processors, and can not be assigned to other channels, buses or outputs. PROCESSOR INPUT EQ + Filters Comp.+ Gate De-esser 4 bands UNIDEX 3 bands 3 bands AES3 3 bands BALANCED 3 bands WWW.SOLIDYNEPRO.COM Solidyne UNIDEX UX24 Page 39... -
Page 40: Low-Pass/Hi-Pass Filters
24 dB/oct. 5.8.2 DYNAMICS The DYNAMIC stage has a noise gate and a wideband dynamic compressor. Processor settings can be saved in the current scene (see SCENES screen). Page 40 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM... -
Page 41: Scenes And User Profiles
There are 3 user profiles with different ac- cess permissions. The restrictions for the on-board SCENE MANAGER: Shows two groups of ac- screen and the remote web interface are the same. tions: for the selected scene and for the current scene. WWW.SOLIDYNEPRO.COM Solidyne UNIDEX UX24 Page 41... -
Page 42: Virtual Mixer
Touch the ORDER CH option. A drop-down menu ap- channel ON buttons. pears beside the names, that allows re-assign the po- sition of each channel. The screen BUSES shows the assignment buttons PGM, REC, AUX, VBUS and the CUE. Page 42 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM... -
Page 43: Section 6 Web Remote Interface
From a computer connected to the same LAN (with ca- ble or WiFi) open a web browser (we recommend Google Chrome) and enter the Unidex IP address . The main screen will open, showing the level indicators and a main menu. WWW.SOLIDYNEPRO.COM Solidyne UNIDEX UX24 Page 43... -
Page 44: Remote Control
UX24 hardware surface. Actions taken on the remote interface are reflected in the console. BUSES: Assign the chanel to a bus. The virtual bus VBUS do not have a hardware button. It is switched from Page 44 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM... -
Page 45: Audio Process
2023 and newer). In order to update older units, in which the online upgrade is not supported, pleas contact info@solidyne.ar +54911 3119 3254 (only Whatsapp) The updates includes: • Firmware for the mixing engine (hardware) • Graphical User Interface. • Streaming module. WWW.SOLIDYNEPRO.COM Solidyne UNIDEX UX24 Page 45... -
Page 46: Section 7 Diagrams And Tech Notes
Quick installation guides Adapter UDX 2MIC http://solidynepro.com/descargas/productos/ENG-UDX2MIC_Quick_installation_guide.pdf Adapter UDX 2TEL y 2TEL-P http://solidynepro.com/descargas/productos/ENG-UDX2TEL_Quick_installation_guide.pdf Adapter UDX TEL+BT http://solidynepro.com/descargas/productos/ENG-UDXTEL+BT_Quick_Installation_Guide.pdf Adapter UDX USB http://solidynepro.com/descargas/productos/UDXUSB_ENG_InstallationGuide.pdf Cables and kits for the installing Listing of cables and adapters (PDF) http://www.solidynepro.com/descargas/folletos_ingles/RJ45cablesUDX-EngCast.pdf Page 46 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM... -
Page 47: Section 8 Tech Specs
SECTION 8 TECH SPECS Main Features • 24 channels; 12 faders on console’s surface, expandible to 24 with 6-faders modules Solidyne UX-6. • 24 virtual faders can be operated from the on-board touch screen. • Internal WEB pages remote interface (HTML5) to remote control via LAN. - Page 48 • Packaging dimensions: 850 mm x 610 mm x 270 mm • Wheight: UX24= 8 Kg Adapters UDX: 0,33 Kg each one Kit cables RJ45: 4 Kg With packaging UX24 + Cables= 15 Kg Page 48 Solidyne UNIDEX UX24 WWW.SOLIDYNEPRO.COM...
Need help?
Do you have a question about the UNIDEX UX24 and is the answer not in the manual?
Questions and answers