Contents- CHAPTER 1 3.2.3.1 Being the cell phone on-air.....18 3.2.3.2 Being the landline on-air......18 Overview .............5 3.2.2 About return signal to the phone......19 1.1 Shipping list.............5 3.2.3 Null-factor............19 1.2 Features............5 3.3 Monitor section..........19 1.2.1 Input channels............5 3.3.1Using monitors and headphones......19 1.2.2 Monitors..............5 3.3.2 Use into integrated Studios.........20 1.2.3 Outputs..............5...
Page 4
This page was left empty intentionally. www.SolidynePro.com Page 4...
Features Studio & Control Room has a unique level knob for D-612 console is a compact, solid and elegant unit; loudspeakers and headphones; and the assignment with a great flexibility for interconnection. It includes switches that allow select between ON-AIR signal...
PGM/REC USB, program or recording out- put is also available via USB. D-612 has send & return connections for external hybrid. The audio from the external hybrid enters trough the “hybrid channel” and operates just as the built-in hybrids;...
The balanced in- will be amplified by the rest of the system. It is fun- puts of the D-612 uses DIN-5 multipin connectors damental, therefore, to maintain the interference (provided with the console). In option, you can ac- within reduced margins.
Solution: D-612 consoles have internal filters against RF interference. Therefore, if interference’s appears, normally is caused by installation prob- lems on the transmission station that generate ele- vated currents in the wiring of audio on the Studies, due to the standing waves. These currents circu-...
Standard cable USB A/B are ABOUT USB DETECTION used. Ports 1.1 or 2.0 are sup- Windows XP : Check the input level at the Windows mixer(“Pro- ported. Place the CPU so next to grams → Accesories → Entretainment → Volume Control”). the console as it will be possible, in order to use a wire of 2 to 3 me- Windows 7...
(+) pin, and leaving uncon- 2.2.4.1 HEADPHONES nected the (-) pin. D-612 has outputs for Studio and Control Room To connect the balanced TRS output to a balanced headphones; with individual level konb. The head- XLR input, the cable will be:...
(PBX) of the radio sta- 4. The ID of the Solidyne D-612 is now stored tion. The private central sometimes deteriorates the in the cell phone. The devices are "paired",...
Re-connections 2.2.6.3 EXTERNAL HIBRYD To reconnect to the console a cell phone, turn Solidyne D-612 has a connector for send and return Bluetooth on the D-612 by pressing for two seconds from external hybrids. "Cellular Phone Bluetooth", until the green LED “External Hybrid”...
2.2.8 Grounding against lighting It is very important to follow these recommendations to avoid irreparable damage to equipment and people. Page 13 www.SolidynePro.com...
Page 14
This page was left empty intentionally. www.SolidynePro.com Page 14...
Hard Disk from PGM or REC. Hybrid controls. Monitoring and talk-back. The D-612 turret contains electronic LED’s VU-me- ters that show the recording and program level (av- MIC EQ erage peak level) and the action of audio compres- Audio compressors and USB ...
(see 3.2.3 – Conferences). Its use is simple and error free due to its logic of secu- The cell phone connects to the Solidyne D612 via rity and automatic control. The following instructions Bluetooth. The first time that a cell phone is used explains different scenarios of use.
3.2.2.1 Incoming call Is explained bellow the use of a cell phone in perma- nent link to the console. In this condition, the proce- dure to put a calling on-the-air is similar to the seen for land lines: • When a call incomes, the 'ringing' is listened simultaneously on the telephone and on the CUE speaker of the console (CUE button pressed)
To put the calling on the air, turn "AIR Make (or receive) the call using the tele- • • LEVEL" to the correct volume. phone associated with the landline. To end the call from the console, make a • Talk with the caller. Warn him that the call •...
Studio. Usually the monitoring level adjusts from the console for a In Solidyne obviously, we keep a high grade of ex- comfortable listening in the headphones. In case cellence in the audio quality of the hybrid on-air that you wants individual control for each head- sound.
The operator can press CUE in a microphone chan- nel to engage in a dialog with the Studio. The D-612 has an internal loudspeaker for previous listening. Each channel has a button “CUE” that al- lows to listen the signal present in that channel with ...
Microphone channels 4 bands EQ. This stage has a dynamic range compressor compresor that begins to work Gain over 0 VU. The indicator “MIC compressor” shows its action. Enable/disable the phantom power (48V) for MIC-1a and MIC-2a. The processed signal can be sent to PGM and REC.
D-612 has a very steep com- Line channels pression slope and fast attack and recovery times. Solidyne D-612 mixer console has 3 stereo LINE chan- Indicator “MIC COMPRESSOR” shows in dB the re- nels. Line channels have two inputs that are selected duction applied to the signal.
“USB Recording device”: corre- sponds to channel USB 5 and 3.6.2 Recording the phone lines gives the PGM or REC signal. Hybrids of the D-612 signal sent only to program, On the PC: configure your therefore, only recorded...
Page 24
This page was left empty intentionally. www.SolidynePro.com Page 24...
LED on the rear panel (RJ45) is blinking. computer is off, the IP service is not available. Can not find a DHCP server then the D-612 scans the network for 4.3 STL link a free IP address (this can take a few minutes).
Default values are: Example: RTP://0.0.0.0:3030 Format: MPEG stereo In where RTP is the protocol used by the Solidyne D- 612; 0.0.0.0 means from any incoming IP and '3030' Sample rate: 44.1 KHz (MP3) is the port used. Remember to enable your computer ...
CHAPTER 5 Studio Box (optional) Overview 3.- Studio headphones: Takes the mix for the studio headphones. Up to 5 headphones can be used con- StudioBox is an optional accessory which groups in a nected to the Studio Box. single box to all monitoring signals that are needed into the Studio.
Page 28
On the Studio Monitors Loudspeakers output has a level control, but the max- imum level and the signal source depended on the console selection. If the loudspeakers are connected directly to the con- sole’s speaker outs; “Loudspeaker” doesn’t take ef- fect.
CHAPTER 6 About maintenance In order to obtain great results with D-612 consoles, Solidyne provides all necessary parts such as we recommend to follow these steps. buttons, knobs faders. Write info@solidyne.com.ar 5.1 How to get a long life of the console Maintain the room clean and free of dust.
Page 30
This page was left empty intentionally. www.SolidynePro.com Page 30...
Need help?
Do you have a question about the D-612 and is the answer not in the manual?
Questions and answers