Guarantee/Service - Beurer BM 64 Instructions For Use Manual

Storage -20 °C to + 55 °C, < 90% relative humidity
conditions (non-condensing)
Power supply
4 x 1.5 V
Battery life Lasts for approx. 300 measurements depending
on the blood pressure and inflation pressure as
well as the number of Bluetooth
Expected At least 20.000 measurements
service life
Classification Internal power supply, IP20 no AP or APG,
continuous operation, type BF applied part
Data transfer The device uses Bluetooth
via Bluetooth ® Frequency band 2.400 – 2.483 GHz, max. trans-
wireless mission power 5 dBm,
technology
The serial number is located on the device or in the battery com-
partment.
Technical specifications are subject to change without notification
to allow for updates.
• This device conforms with the European standard
EN 60601-1-2 (in accordance with CISPR-11, IEC 61000-3-2,
IEC 61000-3-3, IEC 61000-4-2,
IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-7, IEC 61000-4-8, IEC 61000-4-11) and is sub-
ject to particular precautions with regard to electromagnetic
compatibility. Please note that portable and mobile HF com-
munication systems may interfere with this device.
• The accuracy of this blood pressure monitor has been careful-
ly checked and developed with regard to a long useful life. If
the device is used for commercial medical purposes, it must
be regularly tested for accuracy by appropriate means. Pre-
AA batteries
® connections
® ,
IEC 61000-4-3,
IEC 61000-4-6,
cise instructions for checking accuracy may be requested
from the service address.
Mains part
Model no. LXCP12X-050100BG
Input 100 – 240 V, 50 – 60 Hz, 0.5 A max
Output 5 V DC, 1 A, in conjunction with Beurer blood
pressure monitors only
Manufacturer Shenzhen Iongxc power supply co., ltd.
Protection This device is double protected and has a pri-
mary-side cutout switch which disconnects the
device from the mains in case of malfunction.
Ensure that you have removed the batteries
from the battery compartment before you use
the mains part.
Polarity
Insulated/protection class 2
Housing and The housing of the mains part protects users
protective from touching live parts or parts that could be
covers live (for example with their fingers, or with a
needle or checking hook).
The user must not touch the patient and the
output connector of the AC/DC mains part at
the same time.

12. GUARANTEE/SERVICE

Further information on the guarantee and guarantee conditions
can be found in the guarantee leaflet supplied.
35