Smeg WM72141BK Instructions For Use Manual page 21

Table of Contents

Advertisement

Failure
The machine does not
work (indicator LED's
are not illuminated).
Washing program does
not start (washing
stage LED is fl ashing).
Water does not enter
the machine (after
approx. 8 min the
machine reports failure
-3 fl ashes).
Water is leaking from
the machine.
The machine moves
during operation.
The machine vibrates
during the spin.
Excessive foaming
during washing.
Water is poorly
pumped out or not at
all (machine reports
failure - seven fl ashes
of LED).
Laundry is not properly
spun.
No failure is reported.
Greasy wads appear
on the laundry.
Laundry is stained
after washing.
Possible cause
Machine is not powered.
Door is not properly closed.
Disturbed water inlet.
Filter is not tightly screwed in.
Inlet pipe is not tightly screwed
to the machine or to the water
faucet.
Outlet pipe fell to the fl oor.
The machine is not properly
leveled.
Transport brackets are not
removed.
Unevenly distributed laundry,
especially with very small
quantities (for ex. only the
bathrobe).
Excessive measure of detergent.
Water outlet is clogged.
The machine switched on the
UKS* function. Because of bad
laundry balance, the machine has
automatically reduced spin RPM.
Too little detergent (laundry was
very greasy).
You used liquid detergent or
detergent for colored laundry
which does not contain whitener.
Remedy
Check if:
• power in the socket,
• the fuse is OK,
• plug is in the socket.
Push it towards the machine.
Check if:
• the water faucet is open,
• inlet pipe net fi lter is clean.
Push the START button.
Tighten the fi lter properly.
Tighten the inlet pipe.
Affi x the outlet pipe to the drain.
Level the machine with the adjustable
legs.
Remove transport brackets.
This is normal, the machine will
reduce the RPM if vibrations are too
strong.
Wash larger quantity of laundry.
Use washing powder according to
the instructions by the producer and
according to the water hardness and
soiled laundry.
Use only detergents for machine
washing.
Check if:
• the fi lter is clean,
• outlet pipe is not jammed,
• outlet pipe is positioned higher than
1 m.
Push START again.
The machine operates normally. Wash
large and small pieces of laundry
together.
Wash the laundry again.
Add more detergent for such soiled
laundry, or use liquid detergent.
Use the detergent containing whitener.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents