Titan LX-80 II Instruction Sheet

Instruction Sheet
Important Safety Instructions
Read all safety information before operating the
equipment. Save these instructions.
Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
To reduce the risks of re or explosion, electrical shock and the
injury to persons, read and understand all instructions included in
this manual. Be familiar with the controls and proper usage of the
equipment.
WARNING: EXPLOSION OR FIRE
Solvent and paint fumes can explode or ignite. Property damage and/
or severe injury can occur.
PREVENTION:
electrical equipment and electrical appliances. Avoid creating sparks from
connecting and disconnecting power cords.
Refer to your pump manual to determine if these materials can
be sprayed.
electricity. Static electricity creates a risk of re or explosion in the presence
static discharge.
moving through the area to keep the air within the spray area free from
in the spray area.
instructions.
contains arcing parts that emit sparks and can ignite vapors.
WARNING: INJECTION INJURY
amputation. See a physician immediately.
PREVENTION:
© Titan Tool Inc. All rights reserved.
LX-80 II
Professional Airless Gun
PREVENTION:
1
against an injection injury.
immediately.
functioning properly.
NOTE TO PHYSICIAN:
Injection into the skin is a traumatic injury which can lead to possible
amputation. It is important to treat the injury as soon as possible. DO
NOT delay treatment to research toxicity. Toxicity is a concern with some
coatings injected directly into the blood stream. Consultation with a plastic
surgeon or reconstructive hand surgeon may be advisable.
WARNING: GENERAL
mask when painting.
at all times.
alcohol.
re prevention and operation.
For Professional Use Only
2-Finger Gun 581-085
4-Finger Gun 580-100A