Adjusting Display/Panel Dimmer; Display/Panel Dimmer Preset; Adjusting Display/Panel Dimmer By /Brill Key - Furuno NX-900 Operator's Manual

2.3

Adjusting Display/Panel Dimmer

2.3.1

Display/Panel Dimmer preset

1. Press MENU/ESC key to open the main menu.
2. Select [Display] and press the ENT/ACK key.
3. Select [Dimmer Preset] and press the ENT/ACK key.
Following display appears.
4. Use  or  to select [Day] or [Night] mode for [Display] dimmer, then press the
ENT/ACK key. The setting range is 0 (dark) to 19 (bright).
5. Set the value and press the ENT/ACK key.
• : Raises the dimmer.
• : Decreases the dimmer.
6. Repeat step 4 and 5 for [Panel] dimmer. The setting range is 1 (dark) to 19
(bright).
7. Press MENU/ESC key to close the menu.
2.3.2 Adjusting Display/Panel Dimmer by
Display/Panel Dimmer can also be adjusted by short pressing
Below display appears. Use to adjust display and to adjust Panel dimmer,
then press the ENT/ACK key. Press MSG/FILTER key to change between [Day] or
[Night] mode.
2. OPERATION
/BRILL key
/BRILL key.
2-3