Table of Contents
Advertisement
Canceling the Delayed Start function
and start the programme immediately:
middle of the delayed start time on the display stops
the programme.
Starting the programme
has started appears on the display (Prewash, Main
Wash, Rinse, Softener and Spin).
Progress of programme
Progress of a running programme is indicated on the
programme step.
Prewash
prewash step has started.
Main Wash
step has started appears on the display.
Rinse
started appears on the display.
Softener
started appears on the display.
Spin
and remains lit during Spin and Pump special
programmes.
C
Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases
disappears when the door is ready to open. You can
Changing the selections after
programme has started
Switching the machine to pause mode
the display indicating that the machine is paused.
Changing the speed and temperature settings
for auxiliary functions
you may cancel or activate the auxiliary functions;
see, "Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
Adding or taking out laundry
the machine to pause mode. The programme
machine was switched into the pause mode will
flash.
auxiliary functions, temperature and speed settings
start the machine.
C
The loading door will not open if the water
temperature in the machine is high or the water
Child Lock
tampering with the machine. Thus you can avoid any
changes in a running programme.
C
You can switch on and off the machine with
When you switch on the machine again,
programme will resume from where it has
stopped.
Press and hold 2
nd
and 4
for 3 seconds. "Con" appears on the display.
C
Same phrase will appear on the display if you
Press and hold 2
nd
and 4
C
new programme.
Canceling the programme
at which the programme was cancelled remains lit.
END
"
" appears on the display and the programme
is cancelled.
C
EN
th
th
Advertisement
Table of Contents
