Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Smeg SW86-1
Summary of Contents for Smeg SW86-1
- Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Smeg SW86-1 o cerca il tuo prodotto tra le migliori offerte di Lavatrici e Asciugatrici SW86-1 SW106-1 Washing Machine User’s Manual Document Number EN_B7SLed_oem_ozt/ 25-02-13.(14:09)
-
Page 2: Important Instructions For Safety And Environment
1 Important instructions for safety and person (preferably an electrician) or someone designated by the importer in order to avoid possible risks. environment 1.2 Intended use This section contains safety instructions that will help protect • This product has been designed for domestic use. It is not from risk of personal injury or property damage. Failure to suitable for commercial use and it must not be used out follow these instructions shall void any warranty. of its intended use. -
Page 3: Appropriate Installation Location
2 Installation 2. Remove transportation safety bolts by turning them gently. Refer to the nearest Authorised Service Agent for installation 3. Attach the plastic covers supplied in the User Manual bag of the product. To make the product ready for use, review into the holes on the rear panel. (P) the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out. Preparation of the location and electrical, tap water and waste water installations at the place of installation is Keep the transportation safety bolts in a safe place to under customer's responsibility. -
Page 4: Connecting To The Drain
points. If any leaks occur, turn off the tap and remove the 1. Loosen the lock nuts on the feet by hand. nut. Retighten the nut carefully after checking the seal. To 2. Adjust the feet until the product stands level and prevent water leakages and damages caused by them, balanced. keep the taps closed when the machine is not in use. 3. Tighten all lock nuts again by hand. 2.5 Connecting to the drain • The end of the drain hose must be directly connected to the wastewater drain or to the washbasin. Your house will be flooded if the hose comes warning out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water intake and discharge of the machine, fix the end of the Do not use any tools to loosen the lock nuts. - Page 5 3 Preparation 3.4 Initial use Before starting to use the product, make sure that all 3.1 Sorting the laundry preparations are made in accordance with the instructions in • Sort laundry according to type of fabric, colour, and sections “Important safety instructions” and “Installation”. degree of soiling and allowable water temperature. To prepare the product for washing laundry, perform first • Always obey the instructions given on the garment tags. operation in Drum Cleaning programme. If your product 3.2 Preparing laundry for washing is not equipped with Drum Cleaning programme, perform the Initial Use procedure in accordance with the methods • Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons will described under “5.2 Cleaning the loading door and the damage the machine. Remove the metal pieces or wash drum” section of the user manual.
-
Page 6: Using Detergent And Softener
Adjusting detergent amount The loading door is locked while a programme is running. The amount of washing detergent to be used depends The door can only be opened a while after the programme on the amount of laundry, the degree of soiling and water comes to an end. hardness. In case of misplacing the laundry, noise and warning • Do not use amounts exceeding the dosage quantities vibration problems may occur in the machine. recommended on the detergent package to avoid 3.7 Using detergent and softener problems of excessive foam, poor rinsing, financial savings and finally, environmental protection. When using detergent, softener, starch, fabric dye, bleach • Use lesser detergent for small amounts or lightly soiled or limescale remover read the manufacturer's instructions... -
Page 7: Tips For Efficient Washing
• Use just a little amount (approx. 50 ml) of bleaching agent Using starch and rinse the clothes very well as it causes skin irritation. • Add liquid starch, powder starch or the fabric dye into the Do not pour the bleaching agent onto the clothes and do softener compartment. not use it for coloured clothes. • Do not use softener and starch together in a washing • When using oxygen based bleaches, select a programme cycle. that washes at a lower temperature. • Wipe the inside of the machine with a damp and clean • Oxygen based bleaches can be used together with cloth after using starch. -
Page 8: Operating The Product
4 Operating the product 4.1 Control panel 1 - Programme Selection knob (Uppermost position On/Off) 5 - Auxiliary Function buttons 2 - Programme Follow-up indicator 6 - Delayed Start button (in some models) 3 - Temperature Adjustment button 7 - Start / Pause button 4 - Spin Speed adjustment button 4.2 Preparing the machine 4.4 Main programmes Make sure that the hoses are connected tightly. Plug in your Depending on the type of fabric, use the following main machine. Turn the tap on completely. Place the laundry in the programmes. machine. Add detergent and fabric softener. • Cottons Use this programme for your cotton laundry (such as bed 4.3 Programme selection sheets, duvet and pillowcase sets, towels, bathrobes, Select the programme suitable for the type, quantity underwear, etc.). Your laundry will be washed with vigorous and soiling degree of the laundry in accordance with the washing action for a longer washing cycle. -
Page 9: Additional Programmes
4.5 Additional programmes • Sportswear Use this programme to wash your garments that are worn For special cases, additional programmes are available in for a short time such as sportswear. It is suitable to wash the machine. little amount of cotton / synthetic blended garments. Additional programmes may differ according to the • Curtain model of the machine. Use this programme to wash your tulles and curtains. Thanks to the special spin profile of the programme, tulles • Cotton Economic and curtains crease lesser. You may wash your normally soiled durable cotton and As their meshed texture causes excessive foaming, linen laundry in this programme with the highest energy wash the veils/tulle by putting little amount of detergent into the main wash compartment. Do not put detergent and water saving compared to all other wash programmes in the prewash compartment. -
Page 10: Auxiliary Functions
4.9 Programme and consumption table Auxiliary functions Programme Temperature 65 2.00 • • • • Cotton Cold-90 65 1.35 • • • • Cotton Cold-90 65 0.70 • • • • Cotton Cold-90 60** 44 1.01 • Cottons Eco 40-60 60** 37 0.82 •... -
Page 11: Auxiliary Function Selection
4.10 Auxiliary function selection • Rinse Hold If you are not going to unload your clothes immediately after Use the following auxiliary functions according to your the programme completes, you may use rinse hold function daily needs. Select the desired auxiliary functions before to keep your laundry in the final rinsing water in order to starting the programme. Furthermore, you may also select prevent them from getting wrinkled when there is no water or cancel auxiliary functions that are suitable to the running in the machine. Press Start / Pause button after this process programme without pressing the Start / Pause button when if you want to drain the water without spinning your laundry. the machine is operating. For this, the machine must be in Programme will resume and complete after draining the a step before the auxiliary function you are going to select... -
Page 12: Child Lock
4.12 Child Lock can be opened. Use child lock function to prevent children from tampering If the level is unsuitable, Loading Door light turns off and the with the machine. Thus you can avoid any changes in a loading door cannot be opened. If you are obliged to open running programme. -
Page 13: Maintenance And Cleaning
5 Maintenance and cleaning Use an anti-limescale suitable for the washing machines. Service life of the product extends and frequently faced problems decrease if cleaned at regular intervals. After every washing make sure that no foreign substance is 5.1 Cleaning the detergent drawer left in the drum. Clean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order to prevent accumulation of powder detergent in time. 1. Press the dotted point on the siphon in the softener If the holes on the bellow shown in the figure is blocked, compartment and pull towards you until the compartment open the holes using a toothpick. is removed from the machine. -
Page 14: Draining Remaining Water And Cleaning The Pump Filter
5.5 Draining remaining water and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharge of washing water. Thus, the water will be discharged without any problem and the service life of the pump will extend. If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is clogged or in every 3 a. Pull the emergency draining hose out from its seat months. Water must be drained off first to clean the pump b. Place a large container at the end of the hose. Drain the filter. water into the container by pulling out the plug at the end of the hose. When the container is full, block the inlet In addition, prior to transporting the machine (e.g., when of the hose by replacing the plug. After the container is moving to another house) and in case of freezing of the water, water may have to be drained completely. -
Page 15: Technical Specifications
6 Technical specifications Models (EN) SW106-1 SW86-1 Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net weight (±4 kg.) Electrical input (V/Hz) 220-240 V~ / 50Hz 220-240 V~ / 50Hz Total current (A) 2000-2350 2000-2350 Total power (W) Spin speed (rpm max.) -
Page 16: Troubleshooting
7 Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Cancelling the programme") Water in the machine. • Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the machine.