Table of Contents
Advertisement
Auxiliary function selection
the programme. Furthermore, you may also select
auxiliary function you are going to select or cancel.
the display.
C
a second auxiliary function conflicting with the
and the second auxiliary function selection
will remain active. For example, if you want to
select Quick Wash after you have selected the
Wash will remain active.
C
C
to the model of the machine.
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
function (a).
laundry.
F2 appears on the display when you select this
function.
C
When you select this function, load your
machine with half of the maximum laundry
rinsing in addition to the one already made after the
F3 appears on the display when you select this
function .
This function creases the clothes lesser when they
addition, washing is done with a higher water level.
F4 appears on the display when you select this
function.
immediately after the programme completes, you
may use rinse hold function to keep your laundry
in the final rinsing water in order to prevent them
from getting wrinkled when there is no water in the
this process if you want to drain the water without
spinning your laundry. Programme will resume and
complete after draining the water.
The programme resumes. Water is drained, laundry
is spun and the programme is completed.
holding them in the detergent water prior to startup
of the programme.
Time display
Remaining time to complete the programme
appears on the display while the programme is
running. Tim is displayed as "
minutes format.
C
Programme time may differ from the values
in the "Programme and consumption
temperature, amount and the type of laundry,
auxiliary functions selected and the changes at
the mains voltage.
Delayed start
C
clothes.
detergent, etc. Select the washing programme,
appears. ":" sign in the middle of the delayed start
time on the display starts flashing.
C
the delayed start period. At the end of the
washing cycle starts and the time of the
selected programme appears on the display.
Changing the delayed start period
middle of the delayed start time on the display stops
":" sign in the middle of the delayed start time on the
display starts flashing.
EN
01:30
" in hours and
Advertisement
Table of Contents
