Quiet Function Setting - Gree GTH09K3CI Installation And Operation Manual

Note:
1. After setting BLOW function, turn off the unit by pressing On/Off button on remote controller, indoor
fan will run at low fan speed for 10 min. (BLOW shows).Meanwhile, if BLOW function is canceled indoor
fan will be turned off directly.
2. There is not BLOW function in fan or heating mode.

4.13 Quiet Function Setting

Quiet function consists of two kinds: QUIET and AUTO QUIET.
Press Function button till the unit enters quiet function setting state, Quiet or Auto Quiet mark blinks. In
this case, press▲ or ▼ button to switch between Quiet and Auto Quiet and then press Enter/Cancel button to
turn on this function.
In quiet mode, press Function button till the unit enters quiet function. In this case, Quiet or Auto Quiet
icon blinks and then press Enter/Cancel button to cancel this function.
Quiet function setting is shown in Fig.17
DC Inverter Floor Ceiling Type Air Conditioner
21