Connection Of Equipment - Sony SUPER MOTION HDC-P43 Service Manual

Displaying the SERVICE menu.
1. Display the MAINTENANCE menu.
2. Set the cursor at [AUTO SETUP] on MAINTENANCE menu and press the MENU SEL knob/ENTER button for
at least 10 seconds.
The cursor shifts to [AUTO BLACK].
3. Set the DISPLAY/MENU switch to OFF, and then turn the switch to the MENU side again.
The SERVICE menu is displayed.
Changing Setting Values
• Select a menu item by turning the MENU SEL knob/ENTER button and it is entered by pressing the MENU SEL
knob/ENTER button.
• For items whose values can be modified by turning the MENU SEL knob/ENTER button, set values can be entered
or suspended by the following operations.
To enter:
Press the MENU SEL knob/ENTER button.
To suspend:
Set the DISPLAY/MENU switch to OFF.
To restart the setting operation, turn the DISPLAY/MENU switch to the MENU side again.
Exiting menu
Set the DISPLAY/MENU switch to OFF.
5-1-5.

Connection of Equipment

HDCU4300 connection example
HDC-P43
Lens
(for ENG/EFP)
HDC-P43
CCU extension
adapter
HKCU-SM100
Single-mode
fiber cables
(ST connectors, 1 pare)
Master setup unit
MSU-1000/1500
Optical fiber
cable
SLOT1
(BNC x4)
Camera control unit
HDCU4300
CCA-5 cable
(max. 200 m)
Waveform monitor
A-ch
Y, Pb, Pr
R, G, B
Color monitor
75 Ω
5-5