Hd Sdi Signal Is Not Output Normally From Sdi 1 Connector; The Levels Of G And B Are Changed After Changing R-Ch At White Balance Adjustment - Sony SUPER MOTION HDC-P43 Service Manual

3-2-2.

HD SDI signal is not output normally from SDI 1 connector

HD SDI signal is not output
normally from SDI 1 connector.
Confirm SDI-1 OUT of SDI OUT
page in MAINTENANCE menu
of camera.
Is it set to
MAIN(i)?
Yes
End
3-2-3. The levels of G and B are changed after changing R-ch at white balance
adjustment
Levels of G and B are changed
after changing R-ch at white
balance adjustment.
. When using the HDCU4300
Confirm SLOT1/COLOR SPACE of
D-RANGE/COLOR SPACE page in
SYSTEM OPERATION menu.
. When using the BPU4000/BPU4500
Confirm 4K COLOR SPACE of
BPU MODE page in
CONFIGURATION menu.
Is it set to
NORMAL?
Yes
End
HDC-P43
No
Set it to MAIN(i).
No
Set it to NORMAL.
3-4