11) Adjusting The Height Of The Feed Do G; 12) Adjusting The Tillt Of The Feed Dog - JUKI MO-6000S Series Engineer's Manual

(11) Adjusting the height of the feed dog
The height of main feed dog 8 from the top surface of the throat plate O should be as follows when
it is at its highest posion.
Needle A
T
0
Auxiliary teed dog O is 0-5 mm lower than main teed dog@_
,------
----- --- -- -----------

( 12) Adjusting the tillt of the feed dog

Till of the feed dogs when the feed dogs
have come up most.
Model
MO-6/\00S Series
MO-6904G Series
MO-6914G Series
MO-6916G Series
Standard Adjustment
Front up
(Unit: mm)
Dimension A Dimension B
1.0
(1-2)
1.3
(1.5)
-- ------- - ---- -
1-2
(1-4)
--------- -- -- - -
1.1
(1-3)
24
Model
MO-6/\00S Series
MO-6904G Series
MO-6914G Series
MO-6916G Series
When the feed dog iuls out the lop surface of
the throat plate
Feed dog is
!eveled.
Top surface of
the throat plate
�-��-
(Unit - mm)
Dimension A
1.0
---- --
1.3
1.2
1.1