Automatic Boost Function - Smeg SE644ID Instructions For Fitting And Use

Glass ceramic induction hob
Table of Contents

Advertisement

Operation
Cooking level

Automatic boost function

Setting
1
2
3
4
5
6
7
8
9
22
Time (min:sec)
1:00
3:00
4:48
6:30
8:30
2:50
3:30
4:30
-
Automatic boost function
Parboiling takes place at power level 9 with the automatic boost function.
After a certain time the power level will switch down automatically to a lower
simmering setting (1 to 8).
When using the automatic boost function only the simmering setting with
which the food is to be cooked through needs to be selected since the
electronic unit switches down automatically.
The automatic boost function is suitable for dishes which are cold initially and
are then heated up at high power. These dishes do not need to be constantly
monitored when simmering (e.g. boiling meat for soups).
1. Switch a cooking zone on. The stand-by dot of the cooking zone selected
must light up. It may be necessary to press a Select/Plus key.
2. Select power setting 9. Pressing the Select/Plus key again will activate
the automatic boost function.
The power level setting will indicate A and 9 alternately.
3. Then immediately use the Minus key
setting from 1 to 8.
A and the selected simmering setting will blink alternately.
4. The automatic boost function will operate as programmed. After a certain
time (see chart) the cooking process will be continued with the simmering
setting.
Instructions
• While the automatic boost function is in operation, the Select/Plus key can
be used to raise the simmering power setting. Pressing the Minus key
will switch the automatic boost function off.
• If, after activating the automatic boost function, the power level is left at
level 9 and no lower simmering setting is selected, the automatic boost
function will be switched off automatically after 10 seconds and the cooking
level will remain at 9.
GB
to select a lower simmering

Advertisement

Table of Contents
loading

Table of Contents