Automatic Boost Function; Keeping Warm Function - Smeg SE2320ID Instructions For Fitting And Use

Hide thumbs Also See for SE2320ID:
Table of Contents

Advertisement

Operation
Cooking level

Automatic boost function

set
1
2
3
4
5
6
7
8
9
10
11
12
hold
26
Time (min:sec)
0:40
0:48
1:04
1:36
2:00
2:56
4:00
5:20
7:12
2:00
3:12
-
Automatic boost function
Parboiling takes place at power level 12 with the automatic boost function.
After a certain time the power level will switch down automatically to a lower
simmering setting (1 to 11).
When using the automatic boost function only the simmering setting with
which the food is to be cooked through needs to be selected since the
electronic unit switches down automatically.
The automatic boost function is suitable for dishes which are cold initially and
are then heated up at high power. These dishes do not need to be constantly
monitored when simmering (e.g. boiling meat for soups).
1. Select power setting 0.
2. Then immediately press the plus button
simultaneously to activate the automatic boost function.
A and 12 (A and
if no pot has been put on the cooking zone) will then
blink alternately.
3. Then immediately use the minus button
setting from 1 to 11.
4. The automatic boost function will operate as programmed. After a certain
time (see chart) the cooking process will be continued with the simmering
setting.
Please note
• While the automatic boost function is in operation, the plus button
be used to raise the simmering power setting. Pressing the minus button
will switch the automatic boost function off.
• If, after activating the automatic boost function, the power level is left at
level 12 and no lower simmering setting is selected, the automatic boost
function will be switched off automatically after 10 seconds and the cooking
level will remain at 12.
• If a higher cooking setting or the power boost setting is activated, the
automatic boost function may switch off if the maximum power level is
exceeded (see power management).

Keeping warm function

With the function for keeping food warm
zones to keep food warm. The respective cooking zone is operated at a low
power level.
1. Cookware is placed on a cooking zone and a power level (e.g. 3) is
selected.
2. Keep the minus button
(... 3, 2, 1,
). The setting will stop at
have been activated.
3. Press the minus button
This keeping warm function is available for 120 minutes; the hob will then be
switched off.
and the minus button
to select a lower simmering
you can use one of the cooking
pressed to switch the power settings down
and the warming function will
once to de-activate the function (0).
GB
can

Advertisement

Table of Contents
loading

Table of Contents