Setting The Alarm; Configuring Timer Settings; Correcting Hand And Day Indicator Alignment - Casio 5719 Operation Manual

Table of Contents

Advertisement

Swapping Your World Time and Home
Time
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least two seconds.
The second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and then stops at
[R].
The second hand moves from [R] to [C]
when a connection is established
between the watch and phone.
3. Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
Before swapping
After swapping
Home Time
World Time
World Time
Note
Auto time correction does not work for
24 hours after swapping the Home
Time and World Time.
Watch Operation Guide 5719

Setting the Alarm

1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least two seconds.
The second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and then stops at
[R].
The second hand moves from [R] to [C]
when a connection is established
between the watch and phone.
3. Y
Perform the operation shown on the
phone screen to configure alarm time
settings.
Home Time

Configuring Timer Settings

1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least two seconds.
The second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and then stops at
[R].
The second hand moves from [R] to [C]
when a connection is established
between the watch and phone.
3. Y
Perform the operation shown on the
phone screen to configure the timer time
setting.
Correcting Hand and Day
Indicator Alignment
If the hands and/or day indicator are out of
alignment even though auto time correction is
being performed, you can use the CASIO
WATCHES phone app to adjust them.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least two seconds.
The second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and then stops at
[R].
The second hand moves from [R] to [C]
when a connection is established
between the watch and phone.
3. Y
Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
14

Advertisement

Table of Contents
loading

Table of Contents