Table of Contents
Advertisement
Configuring Dual Time
Settings
Dual Time
Dual Time 24-hour
1.
Pull out the crown to the first click.
This causes the second hand to move to
12 o'clock.
2.
Rotate the crown to change the Dual Time
setting.
You can set the Dual Time in 15-minute
●
increments.
Dual Time 24-hour hand
Dual Time minute hand
Dual Time hour hand
3.
Push the crown back in.
Watch Operation Guide 5719
Swapping Current Location
Time and Dual Time
You can swap the time in your current location
with the Dual Time by holding down (B) for at
least three seconds.
Pressing (B) also causes face illumination
●
to turn on. Keep (B) depressed for at least
three seconds.
Before swapping
Current location time
Dual Time
Note
If you are using the small hour and
●
minute hands for Dual Time, only the
time in your current location will be
swapped with Dual Time. Dates are
not swapped.
Crown
The watch will beep when the alarm time is
reached.
The beeper is muted in the cases described
●
below.
ー
ー
After swapping
Dual Time
Current location time
Using the CASIO WATCHES
Phone App to Configure
Alarm Settings
If the watch is paired with a phone, you can
also use the CASIO WATCHES phone app to
set alarms.
Setting the Alarm
l
Alarm
When battery power is low
When the watch is at Level 2 power
saving
Power Saving
l
19
Advertisement
Table of Contents
