Configuring Alarm Settings; Turning Off The Alarm; Moving To Another Time Zone - Casio 5719 Operation Manual

Configuring Alarm Settings

1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Pull out the crown to the first click.
This turns on the alarm.
3.
Rotate the crown to change the alarm time
setting.
Alarm on
Alarm minute
Alarm hour
24-hour
4.
Push the crown back in.
Note
A beeper sounds for 10 seconds when
●
an alarm time is reached.
The watch will automatically return
●
from the Alarm Mode to the
Timekeeping Mode if you do not
perform any operation for about two or
three minutes.
To stop the alarm
●
To stop the alarm after it starts to sound when
an alarm time is reached, press any button.
Watch Operation Guide 5719

Turning Off the Alarm

To stop the alarm from sounding, perform the
steps below to turn it off.
To have the alarm sound again, turn it on.
●
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Press (D) to move the second hand to
OFF.
Each press of (D) toggles between on
●
and off.
Alarm on
Crown
Moving to Another
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
Before Boarding
●
1.
Configure the World Time (Dual Time) to
the current time at your destination.
Alarm off
Using the CASIO WATCHES Phone
l
App to Configure Settings
Using Watch Operations to Configure
l
Settings
2.
Disable auto time correction.
Using the Watch in a Medical Facility or
l
Aircraft
After Arriving
●
1.
Swap the origin time zone time with the
destination time zone time.
Before swapping
Destination time
Using the CASIO WATCHES Phone
l
App to Configure Settings
Using Watch Operations to Configure
l
Settings
2.
Enable auto time correction.
Using the Watch in a Medical Facility or
l
Aircraft
3.
Correct the time setting.
Triggering Immediate Time Correction
l
Time Zone
Current time
Destination time
After swapping
Destination time
20