1. Manuals
  2. Brands
  3. Rauch Manuals
  4. Farm Equipment
  5. PPS 5 AXIS M
  6. Operator's manual

Rauch PPS 5 AXIS M Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operator's manual
Please read carefully
before using the
machine!
Keep for future use
This operator's and assembly manual is
an integral part of the machine. Suppliers
of new and second-hand machines are
required to document in writing that the
operator's and assembly manual was
delivered with the machine and handed
over to the customer.
a
5903595-
-en-0224
Original instructions

Advertisement

Table of Contents
loading

Related Manuals for Rauch PPS 5 AXIS M

Summary of Contents for Rauch PPS 5 AXIS M

  • Page 1 Operator's manual Please read carefully before using the machine! Keep for future use This operator's and assembly manual is an integral part of the machine. Suppliers of new and second-hand machines are required to document in writing that the operator's and assembly manual was delivered with the machine and handed over to the customer.

  • Page 3: Table Of Contents

    Table of contents Table of contents 1 PPS 5 AXIS M Scope of delivery and assembly of practical test kit 2 Checking or determining the settings 3 Definition of the terms "triangular spreading pattern" and "trapezoidal spreading pattern” 4 Performing a spreading test...
  • Page 4 Table of contents 5903595 PPS 5 AXIS M...

  • Page 5: Pps 5 Axis M

    1. PPS 5 AXIS M PPS 5 AXIS M This manual contains important information on the safe operation of the accessory and how it works. It is therefore an important part of your machine documentation. • Before using the machine, read the manual carefully and keep it for future use. In addition to the information in this manual, also observe all the information in the operating manual for your machine.
  • Page 6 1. PPS 5 AXIS M Assembling the measuring tubes Fig. 1: Assembling measuring tubes Insert locking bolt [3] into foot rest [4]. Fit tube [2] on to locking bolt. Insert hopper [1] into tube [4]. 5903595 PPS 5 AXIS M...

  • Page 7: Checking Or Determining The Settings

    Perform a turning test (see operating manual of your fertilizer spreader). • Adjust metering valves on the left and right (see operating manual for your fertilizer spreader). • Note down the start settings in chapter 4 Performing a spreading test. PPS 5 AXIS M 5903595...

  • Page 8: Definition Of The Terms "Triangular Spreading Pattern" And "Trapezoidal Spreading Pattern

    Due to this characteristic, this spreading pattern is less susceptible to influences such as: • Side wind, • Humidity, • Changed fertilizers and quality. These triangular spreading patterns are usually achieved with fertilizers with very good flight properties (such as calcium ammonium nitrate). 5903595 PPS 5 AXIS M...
  • Page 9 Changed fertilizers and quality. These trapezoidal spreading patterns result from fertilizers with very good flying properties and large working widths (e.g. 36 m), from fertilizers with less good flying properties (e.g. light or angular fertilizers) PPS 5 AXIS M 5903595...

  • Page 10: Performing A Spreading Test

    Performing a spreading test with the desired travel speed and metering quantity for the application: • Open the metering valves 10 m upstream of the collecting vessels. • Close the metering valves 30 m downstream of the collecting vessels. • Spread on both sides. 5903595 PPS 5 AXIS M...
  • Page 11 When a layer of fertilizer develops in the spreading vane, the spreading characteristics and transverse distribution may change. Carry out the inspection only after approx. 300 kg of urea has been spread per disc and a possible layer has developed. PPS 5 AXIS M 5903595...

  • Page 12: Conduction Of A Spreading Test With Two Passes

    When a layer of fertilizer develops in the spreading vane, the spreading characteristics and transverse distribution may change. Carry out the inspection only after approx. 300 kg of urea have been spread per disc and a possible layer has developed. 5903595 PPS 5 AXIS M...

  • Page 13: Conduction Of A Spreading Test With Three Passes

    When a layer of fertilizer develops in the spreading vane, the spreading characteristics and transverse distribution may change. Carry out the inspection only after approx. 300 kg of urea has been spread per disc and a possible layer has developed. PPS 5 AXIS M 5903595...

  • Page 14: Evaluating The Results And Correcting Them If Necessary

    Measure, test With spreading result [A], even distribution Settings are OK (permissible deviation ± 1 graduation mark) Note that a deviation of ± 1 graduation mark corresponds to the measurement deviation and is not a problem. 5903595 PPS 5 AXIS M...
  • Page 15 Examples for the correction of the spreader setting: Fertilizer distribution Measure, test With spreading result [B], too much fertilizer in the Select setting of feed point sooner (e.g. feed point overlap zone. adjustment from 5 to 4). PPS 5 AXIS M 5903595...
  • Page 16 Examples for the correction of the spreader setting: Fertilizer distribution Measure, test With spreading result [C], too little fertilizer in the Select setting of feed point later (e.g. feed point overlap zone. adjustment from 4 to 5). 5903595 PPS 5 AXIS M...
  • Page 17 If the deviations are relatively small, a speed reduction only without feed point adjustment may also be sufficient. Always test step-by-step: First feed point, then the speed. PPS 5 AXIS M 5903595...
  • Page 18 However, only take these measures in the event of over-fertilization of two graduation marks. Otherwise, please apply the measures from test result C. In case of any queries or problems, our test hall is available for you at testhalle@rauch.de and +49 (0) 7221 985-254.

Table of Contents