Rauch MDS.2 Q/W Quick Reference Manual

Quick reference guide
1 Read operator's manual
DANGER!
Risk of death or injury from using
the machine incorrectly.
Read operator's manual
▶
before using the
machine.
2 Connecting the machine
control unit
3 Pre-setting the mounting
height
Normal
fertilizatio
n
Late
fertilizatio
n
5903462-a
4 Setting the spreading
vane
Spreading disc M1
Position
• A to E: Length settings
• 1 to 6: Angle settings
Spreading disc M2
• Only the angle can be adjusted
with the W spreading vane; the
length is fixed.
5 Connecting the
electronic slide
V [mm] H [mm]
actuators
max. max.
NOTICE!
850 850
Property damages caused by
incorrect positioning
metering slide
If the stop levers are positioned
770 830
incorrectly, the operation of the
actuators via the QUANTRON-A
operating unit
damage to the metering slides.
Always clamp the stop
▶
levers at the maximum
scale position.
The stop must be secured in a
position outside of the scale using
a hexagon nut with cover [1].
MDS.2 Q/W
6 Checking the machine
settings
of the
may cause
1
Read operator's manual before using the machine
7 Entering fertilizer
settings
- English - 05/2023