Change Hydraulic Controls - Valtra Q Series Quick Start Manual

Q Series Quick Guide

CHANGE HYDRAULIC CONTROLS

Go to the hydraulic page.
1.
Select the box adjacent to the desired valve.
2.
A new page will open. Select the position to operate it.
3.
Tick the desired box.
4.
The valve can now be operated from this control.
5.
VALTRA EXPERT
• A hydraulic valve can be allocated to serval buttons to operate it from different
locations
• All valves can also be operated as a single action by adjusting the minus (-) port
delivery to x (no function).
(or delivery to = and activate floating)
TIP
26