Basic Functions - Samsung DTB-S500F Instructions For Use Manual

BASIC FUNCTIONS

1. Display Screen
Before you can view the television program, you must perform the installation.
Therefore you will see only menu images at first.
After the television channels have been programmed, you will see the following
picture (banner) each time you switch channels:
Channel Number
Signal Status Program Information
● Press the i key in view mode.
You will also see this picture each time you change channels.
When you press TV/RADIO key on the Remote Control Unit, TV and Radio program are toggled.
Detailed program information
● Press the i key twice while you are viewing a program.
First you will see the banner described above.
After pressing the i key a second time you will receive detailed program information for
current program can be displayed on another banner, if there is more information.
When this information is more than one page, CH+/CH- can be used for page up and down.
N N o o t t e e : This service depends on service provider.
2. Volume Control
To control the volume level :
●
Press the VOL+ or VOL- keys to adjust the volume level.
●
Press the MUTE key to turn to silence mode.
●
Press the MUTE key again or VOL+ or VOL- keys in order to cancel the mute function.
GB-12
The number of soundtrack in current channel
D i g i t a l T e r r e
3. Select Soundtrack
● Press the ALT key to see the soundtrack list.
● Press the / and OK keys to select one.
4. Select Videotrack
● Press the ALT key twice to see the videotrack list.
● Press the / and OK keys to select one.
5. Service List
● Press the LIST key while you are viewing a program.
● Select list by pressing the TV/RADIO.
The icon behind the channel name symbolizes
scrambled channel, and the icon
channel name symbolizes parental locked channel.
●
Select the channel by pressing the
CH+/CH- for moving up or down pages on the lists.
● Press the OK key to watch that channel.
s t r i a l R e c e i v e r
BASIC FUNCTIONS
behind the
/ and press the
GB-13