Table of Contents
Advertisement
Instructions for the user
5.6.1 Heating
Setting the knob to a higher value than the
original value starts the heating phase.
While a cooking zone is heating the display
alternates between the adjacent symbols
and darkness (roughly every second).
5.6.2 Cooling
Regolando la manopola ad un valore
minore di quello di partenza si avvierà la
fase
di
raffreddamento.
Durante
il
raffreddamento di una zona cottura sul
display verranno visualizzati in modo
alternato (ogni secondo circa) i simboli a fianco, compresa una fase di
oscuramento.
5.6.3 Reaching the temperature
When the cooking zone reaches the set temperature, the adjacent
symbol is displayed continuously for about 5 seconds.
5.6.4 Alternation of symbol display
While the temperature level is being adjusted, and for about 5 seconds after the
last adjustment, the display shows the selected level (from 1 to 9). Then,
depending on whether the plate is to heat or cool, the sequences of zone
heating or cooling symbols are displayed. Once the temperature is reached, the
symbol
, appears for about 5 seconds, after which the temperature level is
displayed.
21
Advertisement
Table of Contents
