Table of Contents
Advertisement
Instructions for the user
5. USING THE HOB
Make sure that the burners, flame-spreader crowns and
racks are fitted correctly.
The notches A of the flame-spreader crowns must be
inserted into the housings B of the burner. The igniter
and thermocouple on the hob should fit into the 2 holes
on the burner.
5.1
Positioning the racks
The racks are provided unassembled on the hob. To position each rack correctly
on its burner, follow the instructions below:
Each rack must be positioned on the corresponding burner in order to guarantee
proper operation. Be very careful to match the different central diameters of the
racks to the flame-spreader crowns.
32
Advertisement
Table of Contents
