Lighting - BMW F 900 R 2019 Rider's Manual

9
176
Insert left-hand chain
tensioner 4.
Install washer 3 and axle nut 2,
but do not tighten yet.
z
without centre stand
Remove the auxiliary stand.
Insert the wheel speed sensor
into the bore and tighten
screw 1 to the specified
torque.
Wheel-speed sensor,
OE
rear, to brake caliper car-
rier
Thread-locking compound:
micro-encapsulated
8 Nm
WARNING
Brake pads not lying against
the brake disc
Risk of accident due to delayed
braking effect.
Before driving, check that the
brakes respond without delay.
After completing work, operate
the brake several times until
the brake pads are bedded.
Check chain sag (
Adjust the chain sag (

Lighting

Replacing LEDs for low-
beam and high-beam
headlight
LED low-beam headlight and
LED high-beam headlight can
be replaced only as a complete
unit. Consult a specialist work-
shop, preferably an authorised
BMW Motorrad retailer.
184).
185).