Table of Contents
Advertisement
2
Press SETUP.
When SETUP is pressed for the first time, the
following
screen appears. Though the Setup
Navigator may be used more than once, this screen
only appears the first time SETUP is pressed.
Usingthe Setup Navigator
The Setup Navigator has been designed to simplify the
process of getting the DVD player ready to perform.
Designed as a series of on-screen multiple-choice
questions, the Setup Navigator automatically
sets the
audio, video, and language settings according to how the
questions are answered.
Once this procedure
is
complete, it will be possible to begin using the DVD
player to enjoy DVDs.
The procedure on this page describes the operations
necessary to function within the Setup Navigator
screens. A detailed description
of the contents
of each
question that appears on the screen can be found on
the following
pages.
When
setting
up for the first time
If the disc rack is moving or if a disc is playing, the Setup
Navigator will not be displayed as described in the
procedure on this page. Therefore,
it is recommended
to
wait until the rack has stopped moving before using the
Setup Navigator. If a disc is playing, be sure to press
STOP • before proceeding.
)Setd ag up t_ n_ _%eSel_p N a_ g_
3
Move
the cursor
control
joystick
up or down
to make a selection.
• If you are going to use the Setup Navigator, it is
not necessary to change the setting on the first
screen. Please proceed to the next step.
• If you do not want to set up the player using
the Setup Navigator,
move the cursor control
joystick to select "Not
Used" at this time.
The Setup Navigator function
may still be used at
a later time in manual Setup screen menu
operation (page 39).
4
Press ENTER.
The selection
is entered and the next Setup
Navigator screen appears.
1 _-'-_
_
5
Repeatsteps3and4toanswerthequestions
on the all of the Setup
Navigator
screens
as
c_ _
described
on the following
pages.
4
TO change
the
answer
to a prior question
(Cursor)_
NTER)
Move the cursor control joystick left to return to previous
screens. Please note, however, that you cannot go
forward by moving the cursor control joystick right, so it
will be necessary to answer all the questions that occur
after the screen that was returned to.
U.......2
1
To exit the
Setup
Navigator
Press SETUP while on any of the screens to exit the
Setup Navigator. Please note that if the Setup Navigator
is exited before all the questions are answered, no
settings are changed.
To return
to the Setup
screen
Press RETURN _'.. The Setup Navigator is exited and
the Setup screen General menu screen appears. Please
note that no settings are changed if RETURN ,P- is
pressed before the Setup Navigator is finished.
1
Press 0 STANDBYION
on the front panel (0
on the remote control).
2O
Advertisement
Table of Contents
