Table of Contents
Advertisement
Changing
the password
Change your password whenever
you feel it is
necessary. However. if you forget your existing
password,
you cannot enter this screen to change it.
Selup MgtsuMode.
Basic
2
Select
"Password
Change"
in the ]Parental
Lock] setting
and press
ENTER.
The screen changes to the password
input screen
as shown in the section 'Entering the password'
on
the previous page.
Enter your
current
password.
To enter the password,
refer to 'Entering the
password' on the previous page.
If you have not yet set a password, you cannot
select this setting. Establish a password by
selecting "Level Change" first.
3
Move the cursor control joystick or the
number buttons to enter the new password.
4
When the new password has been entered,
press ENTER.
The new password is set and the screen returns to
the General menu screen. To go back to the
General menu screenwithout making any changes,
press RETURN _,.
Turningthe Screen Saver On
and Off
As a protective function against residual images on the "iV
screen or monitor, a phenomenon
referred to as "screen
burn", the screen saver appears when the same screen
has been displayed for a length of time.
Make changes to the IScreen Saver] setting in the Setup
screen General menu in the "E_oert" menu mode (page 40).
E_-_l Illmu ilode - Ex?erl
Sllup Nwlgl_
p=_lll
L_k - Lev=lO
Edemli I_put- OI
41ee_o,_
IfflmE,_
Changingthe Background
Color of the Screen
You can select a blue or black background
to appear
when the player is in the stop mode.
Make changes to the {Background Colod setting in the
Setup screen General menu in the "Expert"
menu
mode (page 40).
Piwisbil Lock-
Le_s4 8
S¢l,_,lll Sll',_i
- 1311
Settings:
Black
Blue*
Other
*Factory se_ing
When
"Other"
is selected
This player gives you the option of creating your own
background
color by adjusting the red, green and blue
levels.
lIM_
ri_R_m
lit-/*
Ililllls_= ll'_
1
Move the cursor control joystick up or down
to select a color bar.
The selectedcolorbar becomes highlighted.
2
Move the cursor control joystick right or left to
adjust the level of the color.
As the colorbar is adjusted,the squareon the right
side of the screenindicateshow the currentmix of
the three colorsappears.
3
Repeat steps 1 and 2 until you have achieved
a color that you like.
4
Press ENTER to set the color as the
background color.
Settings: On
Off*
*Factor'/setting
7O
Advertisement
Table of Contents
