Rear Panel - Pioneer DV-F727 Operating Instructions Manual

Rear Panel
O-
J' '1
(_) VIDEO OUT jack
Connectthe VIDEO OUT jackto the video inputon a
"IVor monitoror to anAV component w ith video input
capability. When usingthisjack,be sureto set VIDEO
SELECTto the top position (pages 15 and 18).
VIDEO IN Jack
Connectthe VIDEO IN jackto the video outputof
anotherDV-F727 playeror anothercomponentwith
video output capability [page67).
(_ S-VIDEO OUT jack
If your TV or monitor has an S-video input, clear
picture reproduction is possible by connecting the
S-VIDEO OUT jack to your'IV or monitor using a
commercially available S-video cable. When using
this jack, be sure to set VIDEO SELECT to the top
position (pages 16 and 16).
® S-VIDEO IN jack
Connect the S-VIDEO IN jack to another DV-F727
player or component with S-video output capability
(page 67).
VIDEO SELECT switch
Use to set which output is used to output the video
signais. Set to the top position for composite video
and S-video output and to the bottom position for
component video output (pages 15, 16, end 18).
(_ AUDIO OUT jacks
Connect to the stereo audio inputs of a "iV or stereo
AV component, if you are connecting to an AV
component that has both digital and analog input
jacks for DVD player connection, it may be beneficial
to make beth connections (pages 15 and 17).
(_ AUDIO IN jacks
Connectto the analog audiooutputsof another
DV-F727 or componentwith audiooutputcapability
(page66).
(_) MAS'nER-SLAVE CONTROL jacks
Connect two DV-F727 players for singular control of
both players and a total of 601 discs. Connect the
MASTER jack on the player to be used as the
"Master" to the SLAVE jack of s second "Slave"
player using the supplied Master-Slave control cord.
Do net attempt to make connections to other
components using this jack (page 66).
DIGITAL OPT, OUT loptloal) jack
Connect the D(GITAL OPT. OUT (optical) to the
digital optical input of an AV component with a
built-in decoder, etc. to output the digital audio signal
recorded on discs. (page 17).
DIGITAL OUT [coaxial) jack
Connect the DIGITAL OUT (coaxial) to the digital
coaxial input of an AV component to output the digital
audio signal recorded on discs (pages 16 and 17).
_) DIGITAL IN (coaxial) Jack
Connect the DIGITAL IN (coaxial) jack of another
DV-F727 player or another component with digital
output (coaxial) capability (page 66)+
CONTROLjad_
Use to connect this player to another component
bearing the Pioneer _ mark. This lets you control
this unit as though it were a component in a system.
Player operations are then performed by pointing the
remote control st the component that the player is
connected to (page 19).
@
CD-DECK SYNCHRO Jack
If you have a Pioneer cassette deck that has the
CD-Dack svnchro function, connect the CD-DECK
SYNCHRO jacks on this unit to the identical jack on
the cassette deck using a commercially available
cord with a mini ptug (2.5 mm die. with no
resistance) (page 19).
(_ COMPONENT VIDEO OUT jacks
If your "W, projection monitor, projector, or similar
component has component video inputs, you can
produce a high quality picture by connecting to the
component video outputs on thla unit. When using
these jacks, be sure to set VIDEO SELECT to the
bottom position (page 18).
14