Table of Contents
Advertisement
66
Connecting to AnotherPlayer
for Control o f 601Discs
When you have two Pioneer DV-F727 players or decide
to add a second Pioneer DV-F727 player to
accommodate a growing disc collection, it is possible to
make
Master-Stave connections to use both players as a single
unit for total control of up to 601 discs.
• Before making Master-Slave connections, be sure to
complete audio end video connections for the player
to be used as the master player (pages 17 and 18).
• When you are adding a second player, it is
recommended to use the second player as the Slave
player.
• Master-Slave connections nan only be made to
another Pioneer fiio-type DVD player. Connections
cannot be made to a Pioneer file-type CD player.
Be sure to turn the power
off bdore
making
any
connections.
For full and complete Mnster-Slave
connection,
be sure to make connections
for control,
audio, and video as described
in the following
procedure.
1
Connect the supplied control cord from this
player's MASTER-SLAVE CONTROL MASTER
jack to the MASTER-SLAVE CONTROL SLAVE
jack of another Pioneer DV-F727.
Slave DV-F727 player
_n48s
• One Master-Slave control cord is supplied with each unit,
however, only one cord is needed.
• Wrnen a Master-Slave control cord is not firmly connected, or
transr issLon is not made successfully, "CONNECT ERR" is
displayed in the display window of both units. Should this
cccur, please make connec_ons again,
• When not making Master-Slave connections, do nor make any
connections to the MASTER-SLAVE CONTROL jacks,
2
Make
audio connections
from the Slave player
to the AUDIO
IN jacks or DIGITAL
IN (coaxial)
jack on this player corresponding
to the type
of audio connections
made from the Master
player to the TV or AV component.
Analog audio co_nsctlons
• Make connections
from the AUDIO OUT jacks on
the Slave player to the AUDIO iN jacks on the
Master player.
• Use the audio cable included with the Slave
player when making analog audio connections,
• When making analog audio connections, be sure
to match the color of the plugs with the color of
the jacks (rod and white),
Slave DV-F727 player
Digital audio connections
• Connect the DIGITAL OUT (coaxial) jack on the
Slave player to the DIGITAL IN (coaxial) jack on
the Master player.
• Use a commercially available coaxial cable to
connect the DIGITAL OUT (coaxial) jack on the
Slave player to the DIGITAL IN (coaxial) jack on
the Master player.
• The digital audio signal input at the DIGITAL IN
(coaxial) jack is output from both the DIGITAL
OUT (coaxial) and OPT. OUT (optical) jacks.
Slave DV-F727 player
Advertisement
Table of Contents
