Rear Panel - Pioneer DV-C503 Service Manual

QQ
3 7 63 1515 0

Rear Panel

1 2
VIDEO OUT S-VIDEO OUT
AUDIO OUT
R
1
2
9
(*The TV SYSTEM switch is not present on U.S. and Canadian models.)
1
VIDEO OUT jack
Connect to the video input on a TV or monitor or AV amplifier or
TE
L 13942296513
receiver with video input capability.
When using this output, be sure to set VIDEO OUT SELECT to
the left position.
2
S-VIDEO OUT jack
If your TV or monitor has an S-video input, clear picture
reproduction is possible by connecting the player to your TV or
monitor via the S-Video jack.
When using this output, be sure to set VIDEO OUT SELECT to
the left position.
3
COMPONENT VIDEO OUT jacks
If your TV or monitor has component video inputs, you can
produce a higher quality picture on your TV or monitor by
connecting to the component video outputs on this unit. When
using these jacks, be sure to set VIDEO OUT SELECT to the
right position.
4
VIDEO OUT SELECT switch
Use to set which output is used to output the video signals.
Select either video/S-video or component video signal output
depending on the connections you make.
5
AC IN power cord connection terminal (plug varies with
the country/region, so may not match the illustration)
Use to connect the power cord to the wall outlet.
www
.
http://www.xiaoyu163.com
3 4
COMPONENT
VIDEO OUT
VIDEO
OUT
Y
SELECT
L
DIGITAL OUT
TV SYSTEM
CONTROL
OPT.
PAL
NTSC AUTO
8
7 6
x ao
y
i
http://www.xiaoyu163.com
8
6
TV SYSTEM switch* (except for U.S. and Canadian
models)
Q Q
3 6 7 1 3
Use to change the TV signal mode to either PAL or NTSC
according to the type of TV and disc to be used. When the
switch is in the AUTO position, the player outputs the format on
the disc as is.
7
CONTROL IN jack
Use to connect this player to another component bearing the
Pioneer Î mark. This lets you control this unit as though it
were a component in a system. Player operations are then
performed by pointing the remote control at the component that
the player is connect to.
8
DIGITAL OUT jacks (coaxial, optical (OPT.))
Use to output the digital audio signal recorded on discs. You
can output the digital signal via either coaxial or optical output
jack to an AV amplifier or receiver.
9
AUDIO OUT jacks
Use to output two-channel audio (analog) to the audio stereo
inputs on a TV or stereo amplifier. If you are connecting to a
receiver that has both digital and analog input jacks for DVD
player connection, it may be beneficial to make both
connections.
u163
.
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
DV-C503
9 9
5
AC IN
2 8 9 9
91