5.1.4 Interface Specifications
Interface (COM port) for connecting PLC/External devices
Item
Communication standard
Baud rate(bit/s)
Communication
Data length (bit)
condition with
external
Parity
devices
Stop bit (bit)
Trasmission distance
Protocol
Connector
Interface for transferring screen data (USB port)
Item
Communication standard
Connector shape (Note 1)
Trasmission distance
No. of connected units with PC
(Note 1): Take care of handling of the connector not to add an excessive static electricity on the metal part of the
connector.
SD memory card
Item
Support media (Note 1)
Supported format standard
(Note 1): Check the usable temperature range of a SD memory card to be used before use.
Ramco Innovations
Specifications
Conforms to RS-232C (Non-isolated)
9,600, 19,200, 38,400, 57,600, 115,200
7, 8
None, Odd, Even
1
Max. 15m
(Baud rate: 19,200 bit/s)
MEWTOCOL (Protocol for Panasonic PLC: FP series)
MEWTOCOL7 (Protocol for Panasonic PLC: FP7 series)
General-purpose serial (PANASONIC dedicated protocol)
Modbus RTU mode protocol (Master/Slave)
Other companies' PLC protocols
D-sub 9-pin connector (Male)
Specifications
USB2.0
USB MiniB type 5pin
Max. 5 m
1
Specifications
SD memory card, SDHC memory card
(The manufacturer name that the operation check has done: Panasonic
Corporation)
Conforms to SD standard.
(Please format with a format software for SD memory cards.)
www.panasonicsensors.com
(800) 280-6933