Table of Contents
Advertisement
3.3.2 Wiring Example of COM Port
Wiring example (Between FP series COM port and GT707)
Use a loose wire for the connection on the PLC side.
It can be used in combination with our PLC equipped with a RS-232C interface.
Applicable PLC models
Model
Usable combination
Control unit (Type equipped with RS-232C port)
FP0R
C10CRS / C10CRM / C14CRS / C14CRM / C16CT / C16CP / C32CT / C32CP / T32CT /
T32CP / F32CT / F32CP
Usable in combination with each control unit and the following FP-X communication cassettes.
FP-X
AFPX-COM1 / AFPX-COM2 / AFPX-COM4 / AFPX-COM5
Usable in combination with each control unit and the following FP communication cassettes.
FP
AFPG801 / AFPG802 / AFPG806
Usable in combination with each FP7 CPU unit or FP7 serial communication unit and the
FP7
following FP7 communication cassettes.
AFP7CCS1 / AFP7CCS2 / AFP7CCS1M1
FP series
COM port terminal
Signal
Function
name
Send Data
SD
Receive Data
RD
Signal Ground
SG
Ramco Innovations
Pin No.
1
2
3
4
5
6
7
8
9
www.panasonicsensors.com
GT707 series
Signal
Function
name
-
N.C.
RD
Receive Data
SD
Send Data
-
N.C.
SG
Signal Ground
-
N.C.
RS
Request to Send
CS
Clear to Send
-
N.C.
(800) 280-6933
Advertisement
Table of Contents
