Care And Cleaning Information - KONIG+NEURATH NET.WORK.PLACE Assembly And Operating Instructions Manual

CARE AND CLEANING INFORMATION

Melamine-coated and metal surfaces:
Clean the surface with a duster. Use warm water and/or a mild clea-
ner to remove marks, then wipe dry.
Caution: Do not use abrasive cleaners! This can cause permanent
visible damage.
Natural wood finishes:
Wipe the surface with a duster. Use a damp cloth and a neutral clea-
ning agent to remove soiling, then wipe dry.
Caution: Do not use abrasive cleaners! This can cause permanent
visible damage. Avoid direct exposure of the natural wood finish to
high temperatures and moisture. Please note that the natural wood
finish can change colour over time if exposed to UV rays. This is a
natural ageing process of the wood.
Upholstered elements:
Vaccum cleaning: use an upholstery nozzle. Always treat entire sur-
face areas from seam to seam.
No liability is accepted for damage to the finish caused by incorrect
cleaning.
17