Table of Contents
Advertisement
User's Guide
&
&
"Cannot Send or Receive Faxes" on page 123
Cannot Send Faxes to a Speciic Recipient
Check the following if you cannot send faxes to a speciic recipient due to an error.
❏ If the recipient machine does not pick up your call within 50 seconds ater the printer has inished dialing, the
call ends with an error. Dial using a connected telephone to check how long it takes before you hear a fax tone. If
it takes more than 50 seconds, add pauses ater the fax number to send the fax. Press
hyphen is entered as the pause mark. One pause is about three seconds. Add multiple pauses as needed.
❏ If you have selected the recipient from the contacts list, verify that the registered information is correct. If the
information is correct, select the recipient from the contacts list, press the
the Add Entry screen, change Fax Speed to Slow(9,600bps).
&
&
"Managing Contacts" on page 34
&
"Cannot Send or Receive Faxes" on page 123
Cannot Send Faxes at a Speciied Time
Set the date and the time correctly on the control panel.
&
&
"Setup Mode" on page 18
Cannot Receive Faxes
❏ If you have subscribed to a call forwarding service, the printer may not be able to receive faxes. Contact the
service provider.
❏ If you have not connected a telephone to the printer, set the Receive Mode setting to Auto on the control panel.
&
&
"Cannot Send or Receive Faxes" on page 123
Memory Full Error Occurs
❏ If the printer has been set to save received faxes on a computer, turn on the computer that is set to save the
faxes. Once the faxes are saved in the computer, they are deleted from the printer's memory.
Solving Problems
125
to enter the pause. A
r
button, and then select Edit. On
Advertisement
Chapters
Table of Contents
