Drying The Upper Oven Interior; Periodic Maintenance; Changing The Oven Light - LG WDEP9427F.BRSLLGA Owner's Manual

Drying the Upper Oven Interior

The Drying function removes residual water inside
the steam generator. The function takes a little
over 1 minute and runs automatically after any
steam cooking cycle. The Drying function can also
be started manually, if needed.
Setting Drying
1
Make sure that the steam feeder tank is
empty.
2
Press UPPER More Modes and press 6.
3
Press START to begin Drying. The remaining
time appears in the display.

Periodic Maintenance

Changing the Oven Light

The oven light is a standard 25-watt halogen bulb
for ovens.
WARNING
• Make sure that the oven and bulb are cool.
• Disconnect the electrical power to the appliance
at the main fuse or circuit breaker panel. Failure
to do so can result in severe personal injury,
death, or electrical shock.
• Wear gloves while changing the oven light. Glass
fragments from broken bulbs can cause risk of
injury.
• Gently twist the screwdriver blade while
changing the oven light. If you apply force, the
glass or oven may crack.
1
Unplug the oven or disconnect power.
2
Remove the oven racks.
3
Slide a flat blade screwdriver
housing and the glass light cover
4
5
6
7
8
between the
a
.
b
Support the glass light cover with two fingers
to prevent the cover from falling to the
bottom of the oven.
Gently twist the screwdriver blade to loosen
the glass light cover .
c
Remove the bulb from the socket.
Replace the bulb, and reassemble the light
cover by snapping it back into place.
Plug in the oven or reconnect power.
MAINTENANCE 45