Replacing Ink Cartridges - Epson C11CA88001A1 User Manual

Table of Contents

Advertisement

124 | Maintaining and Transporting the Printer
Tip: You can store
partially used ink
cartridges for up to
6 months. If you do so,
Epson recommends
covering the openings
with tape.
7. Press r, then press
OK
Each head alignment takes about 7 minutes. The printer's white beam
sensor reads the alignment pattern and adjusts the printer automatically.
Make sure you don't open the front cover or turn off the printer during
this process.
8. When the uni-directional alignment is finished, press r.
9. Select
HEAD ALIGNMENT
10. Select
, press r, then press
BI-D ALL
11. When done, press

Replacing Ink Cartridges

Before you begin a large print job, you should check your ink levels. If one of
your cartridges is low, you can replace it before you start. Or you can wait
until the ink is expended, replace the cartridge, and then continue the job
without any loss of print quality. However, it is best to replace a low ink
cartridge before starting a large print job.
The easiest way to check ink levels is from the control panel LCD screen.
The numbers above the ink icons on the LCD screen correspond to the
11 ink cartridge slots on the printer.
The icons show the approximate amount of ink remaining.
Ink cartridge number
Ink remaining
124
to start the alignment process.
, select
ALIGNMENT
to start the alignment process.
OK
to exit head alignment mode.
, then select
.
AUTO

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

This manual is also suitable for:

Stylus pro 4900

Table of Contents