Table of Contents
Advertisement
CPU Thermal Throttling Temp
This item is used to force CPU into idle state when CPU temperature is too high or CPU
workload is too heavy.
3-11 Power User Overclock Setting
Profile Load
Profile Save
CPU/HT Reference Clk
PCIE Reference Clock
SB Refence Clock
Memory clock Mode
*Memory clock Value
VDIMM Select
NB Voltage Setting
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
CPU/HT Reference Clock
Use this item to set CPU/HT reference clock in the range of 190～600.
PCIE Reference Clock
Use this item to set PCIE reference clock in the range of 90～250.
SB Reference Clock
Use this item to set SB reference clock in the range of 90～150.
VDIMM
Use this item to set memory module voltage.：1.85V, 1.90 V,1.95V, 2.00V.
NB Voltage Setting
Use the item to set NB voltage. The optional settings are: Default, 1.15V, 1.20V, and 1.25V.
The warning logo as follows shall appear . If you set certain parameters in three
Note!
cases of Power User Overclock Settings item and press F10 to save the
parameters.
Setting the voltage at CPU directly over 1.500v in the CPU Voltage at Next
1:
Boot Item .
Indirectly setting the voltage of CPU over 1.500v by adding certain
2:
percentage of voltage over the previous voltage set in the CPU Voltage at
Next Boot Item.
When the voltage of Memory is set over 2.4v.
3:
Phoenix – AwardBIOS CMOS Setup Utility
Power User Overclock Setting
Press Enter
Press Enter
[200]
[100]
[100]
Auto
DDR533
1.95 V
Default
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
34
Item Help
Advertisement
Table of Contents
