General Precautions
Handling Precautions
Do not leave the product in excessive heat such as
O
O
in a car in direct sunlight. High temperatures can
cause the product to malfunction.
If the product is taken from a cold environment
O
O
into a warm one, condensation may develop on
the product surface and internal parts. To prevent
condensation in this case, first put the product into
an airtight plastic bag before taking it from a cold to
warm environment. Then take out the product after
it has warmed gradually. Do the same when taking
the product from a warm environment into a cold
one.
If there is sand, dust, etc. on the product, use
O
O
a commercially available blower to remove it.
Operating the product with sand, dust, etc. on it
can cause the product to malfunction.
Please also read any related handling precautions
O
O
listed in your lens or camera's instruction manual.
ENG-3