CNS 100 A, CNS 150 A, CNS 200 A, CNS 250 A English Wall mounted convector heater Operation and installation instructions Table of contents 1. Operating instructions 1.1 Description 1.2 Operation 1.3 Safety notes 1.4 Care and maintenance What to do if . . .? 2.
Page 2
≤ 150 mm ≥ 250 mm 100mm ~ 250 mm ≥ 500 mm a a a...
1. Operation instructions for the user and the professional 1.2 Operation 1.3 Safety notes Important features in brief The convector is switched on and off via the switch (1) on the right-hand side. The desired The unit should not be operated room temperature is set via the temperature –...
1.4 Care and maintenance • The unit should never be left in operation In case the power mains supply is damaged, accidentally. it must be replaced by the manufacturer, the If the unit housing shows a slight brown dis- • Special care is required if the unit is used customer service of the manufacturer or an colouration it should be cleaned as soon as in the presence of children, the infirm or ani- authorized and qualified person.
The required electrical connection • The mains connection cable may only be – in the immediate vicinity of pipes or con- is AC 240 V. replaced with original Stiebel Eltron spare tainers which transport or contain flamma- For fixed connection, an earth socket or junc- ble or explosive substances, parts by experts.
Guarantee For guarantees please refer to the respective terms and conditions of supply for your country. The installation, electrical connection and first operati- on of this appliance should be carried out by a qualified installer. The company does not accept liability for failure of any goods supplied which have not been installed and ope- rated in accordance with the manufacturer‘s instructions.
Need help?
Do you have a question about the CNS 100 A and is the answer not in the manual?
Questions and answers