Connection To The Water Supply - Miele WWR860WPS PWash2.0&TDosXL&WiFi Operating Instructions Manual

Table of Contents

Advertisement

Installation
Drain hose
The drain hose is protected by a ventila-
tion system which prevents the washing
machine from being emptied com-
pletely.
The electronic unit  and drainage
and overflow protection
- Drainage protection
Any leaking water is collected in the
sump  in the base of the machine.
A float switch  closes the solenoid
valves , preventing any more water
from flowing into the machine and
water in the suds container is
pumped away.
- Overflow protection
If the water level exceeds a certain
level, the drain pump  switches in
and pumps the excess water away in
a controlled manner.
Should the water level rise repeatedly
in an uncontrolled way, the drain
pump  will switch on continuously,
the washing machine will indicate
that there is a fault and a tone will
sound.

Connection to the water supply

Health risk and risk of damage
due to contaminated incoming water.
The quality of the incoming water
must correspond to the drinking wa-
ter specification of the country in
which the washing machine is being
operated.
Always connect the washing machine
to the mains water supply.
92
Risk of electric shock from mains
voltage.
There are live electrical components
in the water inlet hose.
The water inlet hose must never be
connected in an area subject to spray
water, e.g. from a bath or shower.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wwr 860 wps

Table of Contents