To Listen To The Digital Source - Kenwood DA-9010 Instruction Manual

[ ANALOG ]
Set to DBS/VDP2
TAPE 1 COIVOP A op 2
TAPE 2 VIDEO ee
PHONO
g
S
Set to TAPE1/DAT
at spotait, OBS/voOP 2
TAPE 2
VIDEO TUNER
PHONO
Z) |
Set to TAPE2/VIDEO
Tape 1 CD/VOP 1
10AT OBS/VOP 2
TAPE 2
{VIDEO TUNER
PHONO
4.
tuner or video disc player (VDP 2)
. Press the ANALOG switch.
. Set the ANALOG input selector to the DBS/VDP2 po-
sition.
Tape) deck
. Press the ANALOG switch.
. Set the ANALOG input selector to the TAPE1/DAT po-
sition.
. Operate the tape deck or DAT deck.
. Adjust the volume level and the tone as required.
M@ Playing the tape deck 2 or VCR (video deck)
1,
2.
3.
Press the ANALOG switch.
sition.
Operate the tape deck or VCR.
To listen to the digital source
( DIGITAL ]
Set to CD/VDP1
CO/VDP 1
DAT DBS/VvOP 2
WN =
1)
. Press the DIGITAL switch.
. Set the DIGITAL input selector to the CD/VDP'11 position.
. Set the COAXIAL/OPTICAL switch according to the con-
nection condition.
. Operate the CD player or videodisc player.
. Adjust the volume level and the tone as required.
pa-9010;eN) 11