Chapter 7. User Style Microscope Mode U; Track: Microscope Edit Tm Did; Come Aos - Roland G-800 Reference Manual

G-800 Reference Manual
7. User Style Microscope mode
Change 4
The User Style Microscope mode is similar to the Microscope mode found on Roland MC
series sequencers. Select this mode whenever you need to change just one aspect of an other-
wise perfect User Style (or copied ROM Style).
In this chapter, we will use the word event for any kind of message (identical to MIDI mes-
sages that cause the Arranger to play or set something). An event is thus a command (or
instruction) for the Arranger.
Track Microscope Edit
TRACE MICROSCOPE EDIT
TEA Sri DIISI Ur
mas E SERSTLA
Master page: [F4] (UsrStl) > [SHIFT] + [F2] (Micro)
This page again contains the familiar selection criteria that help you choose the track and pat-
tern. As stated above, you first need to choose a pattern before you can edit it. There is no
way to view all data of a given pattern in Microscope mode. This is also the page you will
return to after leaving the selected Micro Edit function.
Track, Mode, Type, Division, Style a
See page 64 for an explanation of these parameters.
Proceed
Press Part Select [M.DRUMS] to jump to the Microscope Edit page.
Listen
The Listen function allows you to audition the track of the selected pattern.
53995.01.001
B995.01.001 cect 2A
> Master page: [F4] (UsrStl)> [SHIFT] + [F2] (Micro)
Part Select [M.DRUMS] (Proceed)> [F1] (Chnge)
The Microscope Change function is used to modify existing events, which may be anything
from transforming a C#2 into a D2, velocity value "35" into "70", or control change CC1 into
control change CC10.
70