Roland G-800 Reference Manual page 104

G-800 Reference Manual
102
Style Set
o
The Style Set function is used to compile Sets consisting of eight Styles that can be loaded in
one pass. Á Style Set as such is only a file containing a number of User Style names to be
loaded. In other words, a User Style Set does not contain the Styles it will copy to the internal
memory when you load it.
User Style Sets can only access Styles on the same disk. Itis not possible to assign User Styles
of other disks to a Style Set.
— Style Seto Position Disk Style
3TLSTOD1 g -- [ROCKS
STLETORS mee FRR ok
STLSTOAAZ -- | BEATZ
ENE be 3 — PES
¥
Master page: [F5] (Disk) [SHIFT] + [F1] (StlSt)
Style Set
Allows you to select an existing Style Set that can then be edited by assigning other Styles to
a given Position (see below).
New
Press Part Select [M.DRUMS] (New) to create a new Style Set. It will be temporarily called
deere, but you can change the name on the second page.
Position (1~8)
The Position refers to the User Style memory the Style in question will be copied to when you
load this User Style Set. In other words, Position 1= User Style Memory 1, 2= 2 (etc.).
- Disk Style (only Styles on the current disk)
Allows you to assign a User Style to the currently selected Position. If you do not wish to
overwrite a User Style memory when loading this User Style Set, select toke (no
assignment to that Position).
Save
Press Part Select [UPPER1] to jump to the Style Set Save page:
.
STYLE SET NAME |
Cursor/Character
See page 96 for details. If you want the Style Set to be loaded automatically at power-up, call
it ALITOLOAL, If that disk is in the drive when you switch on your G-800, the Autoload Style
Set will be loaded automatically.
Execute
Press Part Select [M.BASS] to save the style Set to disk.