Roland G-800 Reference Manual page 51

User Style mode, Length pages
Let us briefly look at the information that appears on these pages:
Modes of the Basic and Advanced levels Intro/Ending column
Select only one pattern Set length (bars, CPTs) Select all patterns
Track (1ADR-8AC6, All)
Allows you to select the track whose length setting you wish to change. If the length does not
have to be the same for all tracks (which goes unnoticed for looped divisions, see "Looped
divisions" on page 104 in the Player's Guide), try to use only integer muitiples or fractions
for longer or shorter tracks (i.e. 4 bars for one track, while the others are 8 bars in length; 3-
bar patterns don't loop well over 4- or 8-bar tracks).
[F1] Share
Press [F1] to be able to select all shared patterns in one pass. Doing so ensures that clones are
always identical to the original.
[F2] Singl
Press [F2] if you to select only one pattern of a clone group. Changing the length of a
"shared"" pattern needs to be confirmed (see "Cloning and edit functions and possible warn-
ings (Shared)" on page 47).
[F3] Mark +
The Mark function allows you to select several patterns that are not connected to each other.
To select a pattern, use the [ACCOMP/GROUP] knob, then press [F3]. Select another pattern
on this page and press [F3] again.
[F4] — Rec
Pressing this button will take you back to the UsrStl\Rec level (see page 40).
[F5] Exit
Press this button to return to the Master page.
Select
The Select function, assigned to the [ACCOMP/GROUP] knob, allows you to position the
cursor on the pattern whose length you wish to change.
49