Table of Contents
Advertisement
AF500FTZ and AF330FTZ
• These flash units feature a built-in infrared spotbeam
to assist the autofocus system in dim light and low-
contrast conditions.
• The auto zoom function will automatically adjust the
angle of discharge according to the lens focal length
only when an F or FA lens is in use.
• The AF500FTZ features a wireless slave-sync flash
function.
• The flash effective range appears on the LCD panel
only when an A, F, or FA lens is in use.
• Multiple flash burst on a single frame is possible with
the AF500FTZ.
• These flash units feature the contrast-control-synch
flash. See page 78 for more details.
• In the Programmed AE, Shutter-Priority AE, or
Aperture-Priority AE, the TTL Auto Flash Mode will be
set automatically even if the flash is set to Manual.
• When the flash is charged and left unused for about 3
minutes, the power automatically switches off to save
battery power. Depressing the shutter release button
halfway down will restart charging of the flash units.
AF240FT, AF400FTZ
• These flash units feature a built-in infrared spotbeam
to assist the autofocus system in dim light and low-
contrast conditions.
• In the Programmed AE, Shutter-Priority AE, or
Aperture-Priority AE: TTL Auto Flash Mode will be set
automatically even if the flash unit is set to Manual.
• When the flash unit is charged and left unused for
about 5 minutes, the power will automatically switche
off to save battery power. Depressing the shutter re¬
lease button halfway down will restart charging of the
flash unit.
AF200T, AF280T, and AF400T
• If the TTL auto mode is selected, these flash units can
be used for daylight-sync shooting, because the shut¬
ter speed is adjusted according to the ambient bright¬
ness. The slower shutter speed varies according to
the lens focal length. The shutter speed varies within
the shutter speed range of 1 /100 of second to a
slower speed which does not cause camera shake.
However, when a non-autofocus lens is in use, the
shutter speed is set to 1/100 of second. The aper¬
ture value will also be fixed but will vary depending on
what ISO film is loaded.
Advertisement
Table of Contents
