Table of Contents
Advertisement
3, As shown in the illustration, pull the film leader out
only far enough to reach the take -up spool.
THE SHUTTER CURTAINS ARE
FINE-PRECISION
MATERIAL. DO NOT TOUCH THEM WITH YOUR
FINGERS OR ANY OTHER OBJECT WHILE LOADING
FILM.
• If you have pulled out too much film, push it back into
the cartridge to reduce the slack.
• The DX information pins in the film chamber are used
to read film speed. Keep them clean and free from
scratches. To remove smudges, wipe them gently
with a soft, dry cloth.
4. Align the film leader with the film leader end mark
O
as shown.
♦ Make sure that the film perforations properly engage
on the sprocket teeth
O
.
• Make sure that the film leader is positioned under the
film retainer O as shown in the illustration.
Advertisement
Table of Contents
