Table of Contents
Advertisement
3. Set the shutter dial to the desired shutter speed.
• When the shutter release button is depressed halfway
down, the shutter speed and the aperture value will be
displayed in the viewfinder.
• In the flash photography, when you use the flash sync
shutter speed of 1/100 second or a non-dedicated
external flash unit, set the shutter dial to the [100
(1/100 of second) position.
* Exposure Warning
If the subject is too bright or too dark, the shutter speed
and aperture setting in the viewfinder blink. When the
subject is too bright, choose a faster shutter speed. If it
is too dark, choose a slower shutter speed. When the
shutter speed indication stops blinking, you can take
the picture- If both selected shutter speed and aperture
blink, it means that the exposure is out of metering
range, unable to obtain a correct exposure even if the
shutter speed is adjusted. Select a darker subject if the
subject is too bright. Use a flash if it is too dark.
Advertisement
Table of Contents
